bioresources. com
PEER-REVIEWED ARTICLE
Papadopoulos, A. N., Traboulay, E. A., and Hill, C. A. S. (2002). “One layer experimental particleboard from coconut chips - ( Cocos nucifera L.),” Holz als Roh- und Werkstoff (European Journal of Wood and Wood Products) 60(6), 394-396. DOI: 10.1007/s00107-002-0332-y Plath, E. (1971). “Beitrag zur Mechanik der Holzspanplatten,” Holz als Roh- und Werkstoff (European Journal of Wood and Wood Products) 29(10), 377-382. DOI: 10.1007/BF02616673 Sellers, T. Jr., Miller, G. D., and Fuller, M. J. (1993) . “Kenaf core as a board raw material,” Forest Products Journal 43(7-8), 69-71. Sokolovs`kyi, Y. I., and Petriv, O. M. (2007). “Investigation of the st ress-strain state of particleboard in the process of hot pressing,” Materials Science 43(1), 38-45. DOI: 10.1007/s11003-007-0003-6 Steffen, A., Von Haas, G., Rapp, A., Humphrey, P., and Thömen, H. (1999). “Temperature and gas pressure in MDF -mats during industrial continuous hot pressing,” Holz als Roh- und Werkstoff (European Journal of Wood and Wood Products) 57(2), 154-155. DOI: 10.1007/s001070050033 Strauss, S. H., Brunner, A. M., Busov, V. B., Ma, C., and Meilan, R. (2004). “Ten lessons from 15 years of transgenic Populus research,” Forestry 77(5), 455-465. DOI: 10.1093/forestry/77.5.455 Varanda, L. D., Nascimento, M. F., Christoforo, A. L., Silva, D. A. L., and Lahr, F. A. R. (2013). “Oat hulls as addition to high density panels production,” Materials Research 16(6), 1355-1361. DOI: 10.1590/S1516-14392013005000131 Wang, D., and Sun, X. (2002 ). “Low density particleboard from wheat straw and corn pith,” Industrial Crops and Products 15(1), 43-50. DOI: 10.1016/S0926- 6690(01)00094-2 West, P. W. (2006). Growing Plantation Forests , Springer Verlag, Berlin, Germany. Wong, E. D., Zhang, M., Wang, Q., and Kawai, S. (1999). “Formation of the density profile and its effects on the properties of particleboard,” Wood Science and Technology 33(4), 327-340. DOI: 10.1007/s002260050119 Xu, W., and Suchland, O. (1998): “ Variability of particleboard properties from single- and mixed-species processes, ” Forest Products Journal 48(9), 68-74. Xu, W., and Suchsland, O. (1999). “Within -panel variability and selected property relationships of particleboard from single-and mixed- species processes,” Forest Products Journal 49(10), 36-40 Xu, J., Sugawara, R., Widyorini, R., Han, G., and Kawai, S. (2004). “Manufacture and properties of low-density binderless particleboard from kenaf core,” Journal of Wood Science 50(1), 62-67. DOI: 10.1007/s10086-003-0522-1 Article submitted: March 16, 2016; Peer review completed: May 9, 2016; Revised version received and accepted: June 17, 2016; Published: July 6, 2016. DOI: 10.15376/biores.11.3.6909-6919
6919
Boruszewski et al . (2016 ). “Particleboard density ,” B io R esources 11(3), 6909-6919.
Made with FlippingBook Ebook Creator