PAPERmaking! FROM THE PUBLISHERS OF PAPER TECHNOLOGY Volume 4, Number 1, 2018
Cortec® Introduces EcoShield® Super Barrier Paper and Linerboard: An Environmentally Friendly Replacement for Polycoated and Waxed Papers! Moisture is a major threat to raw materials and finished goods of all kinds — particularly those made of metal and prone to rust and corrosion. Greases and oils sometimes used as lubricants or rust preventatives on metal components add another problem by threatening to leak through packaging and contaminate surrounding areas. Waxed or polycoated papers are traditional moisture-resistant packaging options for problems like these. However, such coated papers pose an environmental problem because they are not recyclable and repulpable. Even if recycled back into the pulp and paper stream, they would first have to go through a costly process of separating the paper base from the coating. To avoid this environmental problem, Cortec® Corporation has developed an environmentally acceptable replacement to unrecyclable polycoated and waxed papers. Cortec’s new high gloss EcoShield® Super Barrier Paper and Linerboard relies on a water-based moisture barrier coating for moisture resistance. The technology makes the paper fully recyclable and repulpable without requiring costly processes to remove the coating from the paper. In addition to recyclability, Cortec’s EcoShield® Super Barrier Paper and Linerboard demonstrated better water vapour barrier properties than polycoated paper and waxed paper during testing. To evaluate the moisture resistance of EcoShield® Super Barrier and Linerboard, the barrier paper was tested against a comparable polyethylene coated paper and a commercial waxed paper according to ASTM E-96 at 73°F (23°C) and 50% relative humidity. The EcoShield® Super Barrier Paper and Linerboard showed a water vapor transfer rate of 0.32-0.37 grams per hour on a square meter of paper. A polycoated paper in the same test allowed slightly more water vapour to pass through in the same time frame, at the higher rate of 0.47-0.71 grams per hour. The waxed paper was much less resistant to water vapour, allowing it to transfer at a rate of 6.5-6.9 grams per hour on the same size of paper. Though it is not intended for applications involving constant water contact, the shiny side of EcoShield® Super Barrier Paper and Linerboard also has the ability to repel liquid water. Its TAPPI T-441 Cobb Water Absorption rate is less than 0.3 grams of water per square meter in 2 minutes. The versatility of EcoShield® Super Barrier Paper and Linerboard as a flexible, moisture barrier material allows it to be used for a variety of packaging applications and beyond: • Protecting moisture sensitive components • Wrapping oily or greasy parts • Lining wood pallets or corrugated boxes • Packaging products • Keeping work surfaces clean with a disposable cover To find out more about EcoShield® Super Barrier Paper and Linerboard, please visit: https://www.cortecvci.com/Publications/PDS/EcoShield_Super_Barrier_Paper.pdf To find out more about Cortec’s innovative packaging pro ducts, please visit: http://www.cortecpackaging.com/
Products & Services
Page 8 of 19
Made with FlippingBook Ebook Creator