Nanomaterials 2023 , 13 , 1931
16of 19
12. Thoemen, H.; Humphrey, P.E. Modeling the physical processes relevant during hot pressing of wood-based composites. Part I. Heat and mass transfer. Eur. J. Wood Wood Prod. 2006 , 64 , 1–10. [CrossRef] 13. Wang, B.J. Experimentation and Modeling of Hot Pressing Behaviour of Veneer-Based Composites. Ph.D. Thesis, University of British Columbia, Vancouver, BC, Canada, 2007. 14. Mattsson, A.; Joelsson, T.; Miettinen, A.; Ketoja, J.A.; Pettersson, G.; Engstrand, P. Lignin inter-diffusion underlying improved mechanical performance of hot-pressed paper webs. Polymers 2021 , 13 , 2485. [CrossRef] [PubMed] 15. Pettersson, G.; Svedberg, A.; Norgren, S.; Engstrand, P. Manufacturing of paper with high wetstrength from CTMP and high yield NSK by combining sizing and wet strength additives with hot-pressing. In Proceedings of the IMPC 2022, Vancouver, BC, Canada, 5–8 June 2022; pp. 109–113. 16. Norgren, S.; Pettersson, G.; Höglund, H. Strong paper from spruce CTMP–Part II: Effect of pressing at nip press temperatures above the lignin softening temperature. Nord. Pulp Pap. Res. J. 2018 , 33 , 142–149. [CrossRef] 17. Pettersson, G.; Norgren, S.; Höglund, H. Strong paper from spruce CTMP-Part I. Nord. Pulp Pap. Res. J. 2017 , 32 , 54–58. [CrossRef] 18. Joelsson, T.; Pettersson, G.; Norgren, S.; Svedberg, A.; Höglund, H.; Engstrand, P. High strength paper from high yield pulps by means of hot-pressing. Nord. Pulp Pap. Res. J. 2020 , 35 , 195–204. [CrossRef] 19. Good, R.J. Contact angles and the surface free energy of solids. In Surface and Colloid Science: Volume 11: Experimental Methods ; Plenum Press: New York, NY, USA, 1979; Volume 11, pp. 1–29. 20. Joelsson, T.; Persson, E.; Pettersson, G.; Norgren, S.; Svedberg, A.; Engstrand, P. The impact of sulphonation and hot-pressing on low-energy high-temperature chemi-thermomechanical pulp. Holzforschung 2022 , 76 , 463–472. [CrossRef] 21. Joelsson, T.; Pettersson, G.; Norgren, S.; Svedberg, A.; Höglund, H.; Engstrand, P. Improved paper wet-strength by increasing lignin content and hot-pressing temperature. TAPPI J. 2020 , 19 , 487–499. [CrossRef] 22. Joelsson, T. The Influence of Pulp Type and Hot-Pressing Conditions on Paper Strength Development. Ph.D. Thesis, Mid Sweden University, Sundsvall, Sweden, 2021. 23. Dufresne, A. Nanocellulose: A new ageless bionanomaterial. Mater. Today 2013 , 16 , 220–227. [CrossRef] 24. Blanco, A.; Monte, M.C.; Campano, C.; Balea, A.; Merayo, N.; Negro, C. Nanocellulose for industrial use: Cellulose nanofibers (CNF), cellulose nanocrystals (CNC), and bacterial cellulose (BC). In Handbook of Nanomaterials for Industrial Applications ; Elsevier: Amsterdam, The Netherlands, 2018; pp. 74–126. 25. Negro, C.; Balea, A.; Sanchez-Salvador, J.L.; Campano, C.; Fuente, E.; Monte, M.C.; Blanco, A. Nanocellulose and its potential use for sustainable industrial applications. Lat. Am. Appl. Res.-Int. J. 2020 , 50 , 59–64. [CrossRef] 26. Rai, R.; Dhar, P. Biomedical engineering aspects of nanocellulose: A review. Nanotechnology 2022 , 33 , 36. [CrossRef] 27. Benselfelt, T.; Kummer, N.; Nordenström, M.; Fall, A.B.; Nyström, G.; Wågberg, L. The Colloidal Properties of Nanocellulose. ChemSusChem 2023 , 16 , 202201955. [CrossRef] [PubMed] 28. Hokkanen, S.; Bhatnagar, A.; Sillanpää, M. A review on modification methods to cellulose-based adsorbents to improve adsorption capacity. WaterRes. 2016 , 91 , 156–173. [CrossRef] [PubMed] 29. Klemm, D.; Kramer, F.; Moritz, S.; Lindström, T.; Ankerfors, M.; Gray, D.; Dorris, A. Nanocelluloses: A new family of nature-based materials. Angew. Chem. Int. Ed. 2011 , 50 , 5438–5466. [CrossRef] [PubMed] 30. Habibi, Y. Key advances in the chemical modification of nanocelluloses. Chem. Soc. Rev. 2014 , 43 , 1519–1542. [CrossRef] 31. Jorfi, M.; Foster, E.J. Recent advances in nanocellulose for biomedical applications. J. Appl. Polym. Sci. 2015 , 132 , 14719. [CrossRef] 32. Oksman, K.; Aitomäki, Y.; Mathew, A.P.; Siqueira, G.; Zhou, Q.; Butylina, S.; Tanpichai, S.; Zhou, X.; Hooshmand, S. Review of the recent developments in cellulose nanocomposite processing. Compos. Part A Appl. Sci. Manuf. 2016 , 83 , 2–18. [CrossRef] 33. Balea, A.; Fuente, E.; Blanco, A.; Negro, C. Nanocelluloses: Natural-based materials for fiber-reinforced cement composites. A critical review. Polymers 2019 , 11 , 518. [CrossRef] 34. Rana, A.K.; Thakur, V.K. Impact of physico-chemical properties of nanocellulose on rheology of aqueous suspensions and its utility in multiple fields: A review. J. Vinyl Addit. Technol. 2023 , 1–32. [CrossRef] 35. Zhao, S.; Malfait, W.J.; Guerrero-Alburquerque, N.; Koebel, M.M.; Nyström, G. Biopolymer aerogels and foams: Chemistry, properties, and applications. Angew. Chem. Int. Ed. 2018 , 57 , 7580–7608. [CrossRef] 36. Serpa, A.; Vel á squez-Cock, J.; Gañ á n, P.; Castro, C.; V é lez, L.; Zuluaga, R. Vegetable nanocellulose in food science: A review. Food Hydrocoll. 2016 , 57 , 178–186. 37. Chen, W.; Yu, H.; Lee, S.-Y.; Wei, T.; Li, J.; Fan, Z. Nanocellulose: A promising nanomaterial for advanced electrochemical energy storage. Chem. Soc. Rev. 2018 , 47 , 2837–2872. [CrossRef] [PubMed] 38. Salama, A.; Abouzeid, R.; Leong, W.S.; Jeevanandam, J.; Samyn, P.; Dufresne, A.; Bechelany, M.; Barhoum, A. Nanocellulose-based materials for water treatment: Adsorption, photocatalytic degradation, disinfection, antifouling, and nanofiltration. Nanomaterials 2021 , 11 , 3008. [CrossRef] [PubMed] 39. Balea, A.; Fuente, E.; Monte, M.C.; Merayo, N.; Campano, C.; Negro, C.; Blanco, A. Industrial application of nanocelluloses in papermaking: A review of challenges, technical solutions, and market perspectives. Molecules 2020 , 25 , 526. [CrossRef] 40. Bacakova, L.; Pajorova, J.; Bacakova, M.; Skogberg, A.; Kallio, P.; Kolarova, K.; Svorcik, V. Versatile application of nanocellulose: From industry to skin tissue engineering and wound healing. Nanomaterials 2019 , 9 , 164. [CrossRef] [PubMed] 41. Delgado-Aguilar, M.; Negro, C. Preparation, Characterization and Industrial Application of Nanocellulose. Nanomaterials 2023 , 13 , 1592. [CrossRef]
Made with FlippingBook flipbook maker