Nagasawa, Kaneko and Adachi, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.13, No.1 (2019)
p 2 = b 1 ή b 0
: an exponential coefficient derived from Eq.(3), Eq.(4)
T 2,1 (0): initial release angle E 1 , E 0 : gradient coefficient and intercept derived from Eq.(9) Here, E 0 = T 2,1 (0)| Z =0.2rps
Acknowledgement This work was supported by a fund for developing a core of excellence as innovative and branding project, from the GIGAKU Innovation Promotion Center, NUT, 2012-2016.
References
Beex, L.A.A, Peerlings, R.H.J., An experimental and computational study of laminated paperboard creasing and folding, International Journal of Solids and Structures, Vol.46, No.24, (2009), pp.4192-4207, DOI: 10.1016/j.ijsolstr. 2009.08.012. Betten, J., Creep Mechanics, Springer (2002), pp.185-193. CST-J-1, Katayama Steel Rule Die Inc., Tokyo, Japan (online), available from <diemex.com/sale/cst_e.html>, (accessed on May, 2013). Hine, D.J., Testing boxboard creasing, Modern Packaging, Vol.8, (1959), pp. 122-128. Johanson, F., Kubat, J., Measurements of Stress Relaxation in Paper, Svensk Papperstidning, Vol.20, No.31 (1964), pp.822-832. Kirwan, M.J., Folding cartons (Handbook of Paper and Paperboard Packaging Technology), 2nd eds., M.J. Kirwan (Ed.), Wily-Blackwell (2013), pp.265-312. Nagasawa, S., Fukuzawa, Y., Yamaguchi, T., Tsukatani, S. & Katayama, I., Effect of crease depth and crease deviation on folding deformation characteristics of coated paperboard, Journal of Materials Processing Technology, Vol.140, (2003), pp. 157-162, DOI: 10.1016/S0924-0136(03)00825-2. Nagasawa, S. Murayama, M., Fukuzawa, Y. & Sadamoto, A., Mechanics of Die Cutting for Paperboard Materials Processing, 1st eds., Nagasawa (Ed.), Kameda book service (2004), pp.88-89. Nagasawa, S., Endo, R., Fukuzawa, Y., Uchino, S. & Katayama, I., Creasing characteristic of aluminum foil coated paperboard, Journal of Materials Processing Technology, Vol.201, (2008), pp. 401–407, DOI: 10.1016/j.jmatprotec. 2007.11.253. Nagasawa, S., Nasuruddin, M., Shiga, Y., Bending Moment Characteristics on Repeated Folding Motion of Coated Paperboard Scored by Round-Edge Knife, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.5, No.4, (2011), pp.385-394, DOI: 10.1299/jamdsm.5.385. Nagasawa, S., Shiga, Y., Fukuzawa, Y., Effects of scoring depth, tracking angle, rubbering on bending-moment relaxation of creased paperboard, Advanced Materials Research, 939 (2014), pp.53-59, DOI: 10.4028/www.scientific.net/ AMR.939.53. Nagasawa, S., Ozawa, S., Fukuzawa, Y., Effects of folding numbers, scoring depth and bending velocity on bending- moment relaxation of creased paperboard, Mechanical Engineering Journal, Vol.2 No.1, (2015), 14-00346, pp.1-9, DOI: 10.1299/mej.14-00346. Nagasawa, S., Ozawa, S., Effect of bending velocity on time-dependent release behavior of creased white-coated paperboard, Mechanical Engineering Journal, Vol.3 No.3, (2016), 16-00182, pp.1-11, DOI: 10.1299/mej.16-00182. Nagasawa, S., Adachi, D., Sasada, N., Effect of Stopping Time on Time-Dependent Release Behavior of Creased White- Coated Paperboard and Analysis of Nonlinear Relaxation Characteristics, Journal of the Japan Society for Technology of Plasticity (in Japanese), Vol.58 No.673 (2017), pp.151-156, DOI: 10.9773/sosei.58.151. Nygards, M., Just, M., Tryding, J., Experimental and numerical studies of creasing of paperboard, International Journal of Solids and Structures, Vol.46, No.11-12, (2009), pp.2493-2505, DOI: 10.1016/j.ijsolstr.2009.02.014. Sharon, K.W., Etienne, M., Efraim, L., Stress Relaxation of a Paper Sheet under Cyclic Load: An Experimental and Theoretical Model, Material Science and Application, Vol.1 (2010), pp.317-322, DOI: 10.4236/msa.2010.16046. Sudo, A., Nagasawa, S., Fukuzawa, Y., Katayama, I., Analysis of exfolidation of laminated layers and creasing deformation of paperboard, Proceedings of the JSME HS annual meeting, No.047-1, (2005), pp.35-36 (in Japanese), DOI:10.1299/ jsmehs.2005.42.35.
© 2019 The Japan Society of Mechanical Engineers
[DOI: 10.1299/jamdsm.2019jamdsm0004]
2 10
Made with FlippingBook - Online catalogs