bioresources. com
PEER-REVIEWED ARTICLE
surface ,” Wood Science and Technology 42, 181-195. DOI: 10.1007/s00226-007- 0166-1 Davim, J. P., Clemente V. C., and Silva, S. (2009). “Surface roughness aspects in milling MDF (medium density fibreboard) ,” The International Journal of Advanced Manufacturing Technology 40, 49-55. DOI: 10.1007/s00170-007-1318-z Davis, E. M. (1962). Machining and Related Characteristics of United States Hardwoods (Technical Bulletin No. 1267), U.S. Department of Agriculture, Forest Service, Washington, D.C. Deus, P. R. D., Alves, M. C. S., and Vieira, F. H. A. (2015). “The quality of MDF workpieces machined in CNC milling machine in cutting speeds, feed rate, and depth of cut ,” Meccanica 50 (12), 2899-2906. DOI: 10.1007/s11012-015-0187-z EN 323 (1993). “Wood based panels – Determination of density ,” European Committee for Standardization, Brussels. Funck, J. W., Forrer, J. B., Buttler, D. A., Brunner, C. C., and Maristany, A. G. (1992). “ Measuring surface roughness on wood: A comparison of laser-scatter and stylus- tracing approaches ,” The International Society for Optical Engineering (SPIE) 1821, 173-184. DOI: 10.1117/12.145533 Gisip, J., Gazo, R., and Stewart, H. A. (2009). “Effects of cryogenic treatment and refrigerated air on tool wear when machining medium density fiberboard ,” Journal of Materials Processing Technology 209(2009), 5117-5122. DOI: 10.1016/j.jmatprotec.2009.02.010 Gupta, A., Jordan, P. J., and Pang, S. (2006). “Modelling of vertical density profile of MDF in hot pressing ,” in: Proceedings of CHEMECA 2006: Knowledge and Innovation, CHEMECA , Auckland, New Zealand, pp. 17-20. Gurau, L., and Irle, M. (2017). “Surface roughness evaluation methods for wood products: A review ,” Current Forestry Reports 3, 119-131. DOI: 10.1007/s40725- 017-0053-4 Haq, S., and Srivastava, R. (2016). “Measuring the influence of materials composition on nano scale roughness for wood plastic composites by AFM ,” Measurement 91, 541- 547. DOI: 10.1016/j.measurement.2016.05.095 Hazir, E., Erdinler, E. S., and Koc, K. H. (2018). “Optimization of CNC cutting parameters using design of experiment (DOE) and desirability function ,” Journal of Forest Research 29(5), 1423-1434. DOI: 10.1007/s11676-017-0555-8 Hızıroğlu, S. (1996). “Surface roughness analysis of wood composites: A stylus method ,” Forest Products Journal 46(7/8), 67-72. Hiziroğlu, S., and Kosonkorn, P. (2006). “Evaluation of surface roughness of Thai medium density fiberboard (MDF) ,” Building and Environment 41(4), 527-533. DOI: 10.1016/j.buildenv.2005.02.016 Iskra, P., and Tanaka, C. (2005). “The influence of wood fiber direction, feed rate, and cutting width on sound intensity during routing ,” Holz als Roh - und Werkstoff 63(3), 167-172. DOI: 10.1007/s00107-004-0541-7 ISO 4287 (1997). “Geometrical product specifications surface texture profile method terms, definitions and surface texture parameters,” International Organization for Standardization, Geneva, Switzerland. Kılıç, M., Burdurlu, E., Aslan, S., Altun, S., and Tümerdem, Ö. (2009). “The effect of surface roughness on tensile strength of the medium density fiberboard (MDF) overlaid with polyvinyl chloride (PVC) ,” Materials and Design 30, 4580-4583. DOI: 10.1016/j.matdes.2009.03.029
İşleyen & Karamanoğlu (2019). “ Roughness of MDF ,” B io R esources 14(2), 3266-3277. 3275
Made with FlippingBook - Online catalogs