bioresources. com
PEER-REVIEWED REVIEW ARTICLE
ASTM D3985- 17 (2017). “Standard test method for oxygen gas transmission rate through plastic film and sheeting using a coulometric sensor ,” ASTM International, West Conshohocken, PA. DOI: 10.1520/D3985-17 ASTM D6400- 12 (2012). “Standard specification for labeling of plastics designed to be aerobically composted in municipal or industrial facilities ,” ASTM International, West Conshohocken, PA. DOI: 10.1520/D6400-12 ASTM D6866- 05 (2005). “Standard test methods for determining the biobased content of natural range materials using radiocarbon and isotope ratio mass spectrometry analysis ,” ASTM International, West Conshohocken, PA. DOI: 10.1520/D6866-05 ASTM D6954- 18 (2018). “Standard guide for exposing and testing plastics that degrade in the environment by a combination of oxidation and biodegradation ,” ASTM International, West Conshohocken, PA. DOI: 10.1520/D6954-18 ASTM E96 / E96M- 16 (2016). “Standard test methods for water vapor transmission of materials ,” ASTM International, West Conshohocken, PA. DOI: 10.1520/E0096_E0096M-16 ASTM F119- 82 (2015). “Standard test method for rate of grease penetration of flexible barrier materials (rapid method ),” ASTM International, West Conshohocken, PA. DOI: 10.1520/F0119-82R15 Auvinen, S. and Lahtinen, K. (2008). “ Chapter 9: Converted paper and paperboard as packaging materials, ” in: Paper and Paperboard Converting , 2 nd edition, J. Kuusipalo, (ed.), Finnish Paper Engineers’ Asso ciation, Vol. 12, pp. 286-332. Bai, H., Li, Y., Wang, W., Chen, G., Rojas, O. J., Dong, W., Liu, X. (2015). “Interpenetrated polymer networks in composites with poly (vinyl alcohol), micro - and nano-fibrillated cellulose (M/NFC) and polyHEMA to develop packaging materials,” Cellulose 22(6), 3877-3894. DOI 10.1007/s10570-015-0748-2 Bertini, F., Canetti, M., Cacciamani, A., Elegir, G., Orlandi, M., and Zoia, L. (2012). “ Effect of ligno-derivatives on thermal properties and degradation behavior of poly (3-hydroxybutyrate)- based biocomposites,” Polymer Degradation and Stability 97(10), 1979-1987. DOI: 10.1016/j.polymdegradstab.2012.03.009 Bhat, R., Abdullah, N., Din, R. H., and Tay, G. S. (2013). “ Producing novel sago starch based food packaging films by incorporating lignin isolated from oil palm black liquor waste,” Journal of Food Engineering 119(4), 707-713. DOI: 10.1016/j.jfoodeng.2013.06.043 Bhatia, A., Gupta, R. K., Bhattacharya, S. N., and Choi, H. J. (2012). “ Analysis of gas permeability characteristics of poly (lactic acid)/poly (butylene succinate) nanocomposites,” Journal of Nanomaterials 2012, 6. DOI: 10.1155/2012/249094 Bilbao-Sainz, C., Avena-Bustillos, R. J., Wood, D. F., Williams, T. G., and McHugh, T. H. (2010). “ Composite edible films based on hydroxypropyl methylcellulose reinforced with microcrystalline cellulose nanoparticles ,” Journal of Agricultural Food Chemistry 2010, 58, 3753-3760. DOI: 10.1021/jf9033128 Birley, A. W., Heath, R. J., and Scott, M. J. (1988). Plastic Materials: Properties and Applications , 2 nd edition, Blackie Academic and Professional, Glasgow, 1988. DOI: 10.1007/978-1-4615-3664-2 Bondancia, T. J., Mattoso, L. H. C., Marconcini, J. M., and Farinas, C. S. (2017). “A new approach to obtain cellulose nanocrystals and ethanol from eucalyptus cellulose pulp via the biochemical pathway,” Biotechnology Progress 33(4), 1085-1095. DOI: 10.1002/btpr.2486.
35
Helanto et al. (2019). “ Bio-based barriers ,” B io R esources 14(2), Pg #s to be added.
Made with FlippingBook - Online catalogs