www.nature.com/scientificreports/
25. Perng, Y. S., Wang, I. C., Cheng, Y. L. & Chen, Y. C. Effects of fiber morphological characteristics and refining on handsheet proper- ties. Taiwan Lin Ye Ke Xue 24 , 127–139 (2009). 26. Choi, E. Y. & Cho, B. U. Effect of beating and water impregnation on fiber swelling and paper properties. J. Korea TAPPI 45 , 88–95 (2013). 27. Pruden, B. The effect of fines on paper properties. Pap. Technol. 46 , 19–26 (2005). 28. Kibblewhite, R. P. Interrelations between pulp refining treatments, fibre and pulp fines quality, and pulp freeness. Pap. Puu-Pap. Tim. 57 , 519–526 (1975). 29. Olejnik, K. Effect of the free swelling of refined cellulose fibres on the mechanical properties of paper. Fibres Text. East. Eur. 20 , 113–116 (2012). 30. Sundblad, S. Predictions of Pulp and Paper Properties Based on Fiber Morphology . Master Thesis in Macromolecular Materials, KTH Vetenskap Och Konst, Stockholm, Sweden (2015). 31. Retulainen, E. The Role of Fibre Bonding in Paper Properties (National Technical Information Service, Espoo, 1997). 32. Hietanen, S. E. K. Fundamental aspects of the refining process. Pap. Puu-Pap. Tim. 72 , 158–170 (1990). 33. Wang, X., Maloney, T. & Paulapuro, H. Fibre fibrillation and its impact on sheet properties. Pap. Puu-Pap. Tim. 89 , 148–151 (2007). 34. Lindqvist, H. et al. The effect of fibre properties, fines content and surfactant addition on dewatering, wet and dry web properties. Nord. Pulp Pap. Res. J. 27 , 104–111 (2012). 35. Kekäläinen, K., Illikainen, M. & Niinimäki, J. Morphological changes in never-dried kraft fibers under mechanical shearing. Cel- lulose 19 , 879–889 (2012). 36. Heymer, J. O., Olson, J. A. & Kerekes, R. The role of multiple loading cycles on pulp in refiners. Nord. Pulp Pap. Res. 26 , 283–287 (2018). 37. Vishtal, A. & Retulainen, E. Boosting the extensibility potential of fibre networks: A review. BioRes. 9 , 7933–7983 (2014). 38. Cheng, Q., Wang, J., McNeel, J. & Jacobson, P. Water retention value measurements of cellulosic materials using a centrifuge technique. BioRes. 5 , 1945–1954 (2010). 39. Scallan, A. M. & Carles, J. The correlation of the water retention value with the fibre saturation point. Sven Papperstidning 75 , 699–703 (1972). 40. Bäckström, M., Kolar, M. & Htun, M. Characterisation of fines from unbleached kraft pulps and their impact on sheet properties. Holzforschung 62 , 546–552 (2008). 41. Ferreira, P. J., Matos, S. & Figueiredo, M. M. Size characterization of fibres and fines in hardwood kraft pulps. Part. Part. Syst. Charact. 16 , 20–24 (1999). 42. Ciesielski, K. & Olejnik, K. Application of neural networks for estimation of paper properties based on refined pulp properties. Fibres Text. East. Eur. 5 , 126–132 (2014). 43. Paavilainen, L. Importance of particle size: fibre length and fines: for the characterization of softwood kraft pulp. Pap. Puu-Pap. Tim. 72 , 516–526 (1990). 44. Hai, L. V., Park, H. J. & Seo, Y. B. Effect of PFI mill and Valley beater refining on cellulose degree of polymerization, alpha cellulose contents, and crystallinity of wood and cotton fibers. J. Korea TAPPI 45 , 27–33 (2013). 45. Wathén, R. Studies on Fiber Strength and its Effect on Paper Properties . Dissertation for the degree of Doctor of Science in Technol- ogy, KCL Communications 11, Helsinki University of Technology (2006). 46. Motamedian, H. R., Halilovic, A. E. & Kulachenko, A. Mechanisms of strength and stiffness improvement of paper after PFI refin- ing with a focus on the effect of fines. Cellulose 26 , 4099–4124 (2019). 47. Nordström, B. & Hermansson, L. Effect of fiber length on formation and strength efficiency in twin-wire roll forming. Nord. Pulp Pap. Res. 32 , 119–125 (2017). 48. Biermann, C. J. Refining and Pulp Characterization. Handbook of Pulping and Papermaking 138–139 (Academic Press, 1996). 49. Jang, H. F. & Seth, R. S. Determining the mean values for fibre physical properties. Nord. Pulp Pap. Res. J. 19 , 372–378 (2004). 50. Bajpai, P. The Pulp and Paper Industry. Pulp and Paper Industry: Emerging Waste Water Treatment Technologies 23–25 (Elesiver, 2017). 51. Fišerová, M., Gigac, J. & Balberčák, J. Relationship between fibre characteristics and tensile strength of hardwood and softwood kraft pulps. Cell. Chem. Technol. 44 , 249–253 (2010). 52. Johansson, A. Correlations Between Fibre Properties and Paper Properties . Master Thesis in Pulp Technology, KTH Vetenskap Och Konst (2011). 53. Sjöberg, J. & Höglund, H. Refining system for sack paper pulp: Part 1 HC refining under pressurised conditions and subsequent LC refining. Nord. Pulp Pap. Res. 20 , 320–328 (2005). 54. Larsson, P. T., Lindström, T., Carlsson, L. A. & Fellers, C. Fiber length and bonding effects on tensile strength and toughness of kraft paper. J. Mater. Sci. 53 , 3006–3015 (2018). 55. Watson, A. J. & Dadswell, H. E. Influence of fibre morphology on paper properties. Part 1: fibre length. Appita J. 14 , 168–178 (1961). 56. Horn, R. A. Morphology of Pulp Fiber from Hardwoods and Influence on Paper Strength . USDA Forest Service, Research Paper FPL 312, Forest Products Laboratory, 1–10 (1978). 57. Seth, R. S. The measurement and significance of fines. Pulp Pap. Canada 104 , 41–44 (2003). 58. Odabas, N., Henniges, U., Potthast, A. & Rosenau, T. Cellulosic fines: properties and effects. Prog. Mater. Sci. 83 , 574–594 (2016). 59. Sirviö, J. & Nurminen, I. Systematic changes in paper properties caused by fines. Pulp Pap. Canada 105 , 39–42 (2004). 60. Bossu, J. et al. Fine cellulosic materials produced from chemical pulp: The combined effect of morphology and rate of addition on paper properties. Nanomaterials 9 , 321 (2019). 61. Niskanen, K. (ed.) Paper Physics, Papermaking Science and Technology, Book 16 (Finnish Paper Engineers Association and TAPPI, 1998). 62. Maloney, T. C., Todorovic, A. & Paulapuro, H. The effect of fiber swelling on press dewatering. Nord. Pulp Pap. Res. 13 , 285–291 (1998). 63. Fischer, W. J. et al. Pulp fines-characterization, sheet formation, and comparison to microfibrillated cellulose. Polymers 9 , 366–378 (2017). 64. Park, J. Y., Melani, L., Lee, H. & Kim, H. J. Effect of pulp fibers on the surface softness component of hygiene paper. Holzforschung 74 , 497–504 (2020). 65. Jonsson, D. K. et al. Energy at your service: Highlighting energy usage systems in the context of energy efficiency analysis. Energy Effic. 4 , 355–369 (2011). This work was supported by the National Center of Research and Development in Poland (Project Number POIR.01.01.01-00-0084/17).
Ƥ |
ǣȀȀǤȀͷͶǤͷͶ;ȀͺͷͻͿ;ǦͶͷǦͿͼͻǦͺ
;
(2021) 11:17528 |
Vol:.(1234567890)
Made with FlippingBook Online document maker