bioresources. com
PEER-REVIEWED ARTICLE
EN 312 (2010). “Particleboards. Specifications,” European Committee for Standardization, Brussels, Belgium. EN 317 (1993). “Particleboards and fibreboards. Determination of swelling in thickness after immersion in water,” European Committee for Standardization, Brussels, Belgium. EN 319 (1993). “Particleboards and fibrebo ards. Determination of tensile strength perpendicular to the plane of the board,” European Committee for Standardization, Brussels, Belgium. Fakhri, H. R., Semple, K. E., and Smith, G. D. (2006a). “ Transverse permeability of OSB. Part I. The effects of core fines content and mat density on transverse permeability,” Wood Fiber Sci. 38(3), 450-462. Fakhri, H. R., Semple, K. E., Smith, G. D. (2006b). “ Transverse permeability of OSB. Part II. Modeling the effects of density and core fines content,” Wood Fiber Sci. 38(3), 463-473. Han, G., Wu, Q., and Lu, J. Z. (2006). “ Selected properties of wood strand and oriented strandboard from small diameter southern pine trees,” Wood Fiber Sci. 38(4), 621- 632. Han, G., Wu, Q., and Lu, J. Z. (2007). “ The influence of fines content and panel density on properties of mixed hardwood oriented strandboard,” Wood Fiber Sci. 39(1), 2-15. Haute Innovation (2016). “USB - Platten aus Weichlaubholz,” ( http://www.haute- innovation.com/de/magazin/nachhaltigkeit/usb-platten-aus-weichlaubholz.html), Accessed March 14, 2016. Hermawan, A., Ohuchi, T., Tashima, R., and Murase, Y. (2007). “ Manufacture of strand board made from construction scrap wood,” Resour. Conserv. Recy. 50(4), 415-426. DOI: 10.1016/j.resconrec.2006.07.002 Lee, O. L., and Tahir, P. Md. (2003). “Effects of fine particle content on the properties of five- layered oriented strand board”, (http://www.fao.org/docrep/ARTICLE/WFC/XII/0692-A2.HTM), Accessed July 25, 2016. Mirski, R., and Dziurka, D. (2011a). “ Applicability of strand substitution in the core of OSB,” BioResources 6(3), 3080-3086. DOI: 10.15376/biores.6.3.3080-3086 Mirski, R., and Dziurka, D. (2011b). “ The utilization of chips from comminuted wood waste as a substitute for flakes in the oriented strand board core,” Forest Prod. J. 61(6), 473-478. DOI: 10.13073/0015-7473-61.6.473 Mirski, R., and Dziurka, D. (2015). “ Low- density oriented strand boards,” BioResources 10(6), 6388-6394. DOI: 10.15376/biores.10.4.6388-6394 Moya, L., Tze, W. T. Y., and Winandy, J. E. (2009). “ The effect of cyclic relative humidity changes on moisture content and thickness swelling behavior of oriented strandboard,” Wood Fiber Sci. 41(4), 447-460. Pfleiderer (2016). “Professional choose MFP mfp ,” ( http://www.pfleiderer.pl/plyta- mfp/en/), Accessed July 25, 2016. Roffael, E., Schneider, T., and Dix, B. (2006). “VOC -Emission from wood-based panels - State of the art and measures for reduction,” in: Proceedings of the 5th European Wood-Based Panel Symposium 2006 , Hannover, Germany, pp. 4-6. Sackey, E. K., Zhang, Ch., Tsai Y. L., Prats, A., Gregory D., and Smith, G.D. (2011). “ Feasibility of a new hybrid wood composites comprising wood particles and strands,” Wood Fiber Sci . 43(1), 11-20.
8353
Mirski et al . (2016). “Non - strand chips OSB,” B io R esources 11(4), 8344-8354.
Made with FlippingBook Annual report maker