PAPERmaking! FROM THE PUBLISHERS OF PAPER TECHNOLOGY Volume 2, Number 1, 2016
REFERENCES CITED x Gess, M. D. (1998). “Retention in neutral and alkaline papermaking,” in: Retention of Fines and Fillers during Papermaking (1st Ed.), TAPPI Press, Atlanta, GA, USA. x Gulsoy, S. K., Kustas, S., and Erenturk, S. (2013). “The effect of old corrugated container (OCC) pulp addition on the properties of paper made with virgin softwood kraft pulps,” BioResources 8(4), 5842 -5849. DOI:10.15376/biores.8.4.5842-5849 x Hubbe, M. A., Venditti, R. A., and Rojas, O. T. (2007). “ What happens to cellulosic fibers during papermaking and recycling? A review,” BioResources 2(4), 739 -788. DOI: 10.15376/biores.2.4.739-788 x Ibarra, D., Monte, M. C., Blanco, A., Martínez, A. T., and Martínez, M. J. (2012). “Enzymatic deinking of secondary fibers: Cellulases/hemicellulases versus laccase- mediator system,” Journal of Industrial Microbiology and Biotechnology 39(1), 1-9. DOI: 10.1007/s10295-011-0991-y x Im, W. H., Seo, D. I., Oh, K. D., Jeong, Y. B., Youn, H. J., and Lee, H. L. (2015). “Effects of preflocculated filler flocs and nano -sized coating binder on fold cracking of coated paper,” Journal of Korea TAPPI 47(5), 91 -97. DOI: 10.7584/ktappi.2014.47.5.091 x Jung, J. K., and Seo, Y. B. (2015). “Development of hybrid calcium carbonate for high loading paper: Manufacture and application of hybrid calcium carbonate,” Journal of Korea TAPPI 47(4), 30-37. DOI: 10.7584/ktappi.2015.47.4.030 x Kiviranta, A. (1997). “Paperboard grades in paper and board grades” in: Papermaking Science and Technology (1st ed.), TAPPI Press, Atlanta, GA, USA. x Kroguerus, B. (1997). “Fillers and pigments in papermaking chemistry,” in: Papermaking Science and Technology (1st Ed.), TAPPI Press, Atlanta, GA, USA. x Lee, T. J., Choi, D. C., Kim, M. S., and Ryu, J. Y. (2015). “Studies on deinking properties of recovered paper for manufacturing eco-friendly thermal recording paper,” Journal of Korea TAPPI 47(6), 98 -105. DOI:10.7584/ktappi.2015.47.6.098 x Lee, J. Y., Kim, C. H., Seo, D. J., Lim, G. B., Kim, S. Y., Park, J. H., and Kim, E. H. (2014a). “Fundamental study on developing wood powder as an additive of paperboard,” TAPPI Journal 13(11), 17 -22. x Lee, J. Y., Lim, G. B., Kim, S. Y., Park, J. H., Kim, E. H., Sung, Y. J., Heo, Y. J., Kim, Y. H., and Lee, S. R. (2014b). “Applicat ion evaluation of physical and strength properties of paperboard by kraft pulp mixing made from agricultural byproducts,” Journal of Korea TAPPI 46(5), 43-50. DOI:10.7584/ktappi.2014.46.5.043 x Park, J. H., Lee, J. Y., Kim, C. H., and Kim, E. H. (2015). “Eff ects of lignocellulosic bulking agents made from agricultural byproducts on physical properties and drying energy consumption of duplex board,” BioResources 10(4), 7889 -7897. DOI: 10.15376/biores.10.4.7889-7897 x Retulainen, E., Niskanen, K., and Nilsen, N. (1997). “Fibers and Bonds in Paper Physics,” in: Papermaking Science and Technology (1st ed.), TAPPI Press, Atlanta, GA, USA. x Seo, Y. B., Lee, M. W., Lee, Y. H., and Jung, J. K. (2014). “Application of in -situ CaCO3 formation method for better utilization of recycled fibers: Enhancing attachment of CaCO3 to fibers by polymer pre- treatment,” Journal of Korea TAPPI 46(5), 19-26. DOI: 10.7584/ktappi.2014.46.5.019 x TAPPI T244 cm- 99. (1999). “Acid -insoluble ash in wood, pulp, paper, and paperboard,” TAPPI Press, Atlanta, GA. x TAPPI T205 sp- 06. (2006). “Forming handsheets for physical tests of pulp,” TAPPI Press, Atlanta, GA.
Page 9 of 10
Article 1 – Improving Retention and Strength
Made with FlippingBook Digital Publishing Software