PAPERmaking! g FROM THE PUBLISHERS OF PAPER TECHNOLOGY Volume 2, Number 1, 2016
x Luo, P., and Yang, C. (2011). “Binderless particleboard from steam exploded wheat straw,” Applied Materials Research 179 -180, 807-811. DOI: 10.4028/www.scientific.net/amr.179-180.807 x Luo, P., and Yang, C. (2012). “Production of binderless particleboard using rice straw pre- treated with liquid hot water,” Applied Mechanics and Materials 200, 331 - 334. DOI: 10.4028/www.scientific.net/AMM.200.331 x Mancera, C., Ferrando, F., and Salvado, J. (2008). “Cyna ra cardunculus as raw material for the production of binderless fiberboards: Optimization of pretreatment and pressing conditions,” Journal of Wood Chemistry and Technology 28(3), 207 - 226. DOI: 10.1080/02773810802347024 x Marashdeh, M. W., Hashim, R., Tajuddin, A. A., Bauk, S., and Sulaiman, O. (2011). “Effect of particle size on the characterization of binderless particleboard made from Rhizophora spp. mangrove wood for use as phantom material,” BioResources 6(4), 4028-4044. DOI: 10.15376/biores.6.4.4028-4044 x Miki, T., Takakura, N., IIzuka, T., Yamaguchi, K., and Kanayama, K. (2003). “Possibility of extrusion of wood powders,” JSME International Journal Series A 46(3), 371-377. DOI: 10.1299/jsmea.46.371 x Mobarak, F., Fahmy, Y., and Augustin, H. (1982). “Binder less lignocellulose composite from bagasse and mechanism of self- bonding,” Holzforschung 36(3), 131-135. DOI: 10.1515/hfsg.1982.36.3.131 x Mohanty, A. K., Misra, M., Drzal, L. T., Selke, S. E., Harte, B. R., and Hinrichsen, G. (2005). “Natural fibers, biopolymers and biocomposites: An introduction,” in: Natural Fibres, Biopolymers and Biocomposites, A. K. Mohanty, M. Misra, and L. T. Drzal (eds.), Taylor & Francis, Boca Raton, FL. DOI: 10.1201/9780203508206.ch1 x Mohanty, A. K., Misra, M., and Hinrichsen, G. (2 000). “Biofibres, biodegradable polymers and biocomposites: An overview,” Macromolecular Materials and Engineering 276(1), 1-24. DOI: 10.1002/(SICI)1439- 2054(20000301)276:1<1::AIDMAME1> 3.0.CO;2-W x Munawar, S. S., Umemura, K., and Kawai, S. (2007). “Charact erization of the morphological, physical and mechanical properties of seven non-wood plant fibre bundles,” Journal of Wood Science 53(2), 108 -113. DOI: 10.1007/s10086-006- 0836-x x Okamoto, H., Sano, S., Kawai, S., Okamoto, T., and Sasaki, H. (1994). “Product ion of dimensionally stable medium density fiberboard by use of high-pressure steam pressing,” Mokuzai Gakkaishi 40(4), 380 -389. x Okuda, N., and Sato, M. (2004). “Manufacture and mechanical properties of binderless boards from kenaf core,” Journal of Wood S cience 50(1), 53-61. DOI:10.1007/s10086-003-0528-8 x Okuda, N., and Sato, M. (2006). “Water resistance properties of kenaf core binderless boards,” Journal of Wood Science 52(5), 422 -428. DOI: 10.1007/s10086- 005-0785-9 x Okuda, N., Hori, K., and Sato, M. (2006 a). “Chemical changes of kenaf core binderless boards (I): Influence of the pressing temperature condition,” Journal of Wood Science 52(3), 244-248. DOI: 10.1007/s10086-005-0761-4 x Okuda, N., Hori, K., and Sato, M. (2006b). “Chemical changes of kenaf core binderless boards during hot pressing (II): Effects on binderless boards properties,” Journal of Wood Science 52(3), 249-254. DOI: 10.1007/s10086-005-0744-5 x Panyakaew, S., and Fotios, S. (2011). “New thermal insulation boards made from coconut husk a nd bagasse,” Energy and Buildings 43(7), 1732 -1739. DOI: 10.1016/j.enbuild.2011.03.015
Page 16 of 18
Article 4 – Wood Panels
Made with FlippingBook Digital Publishing Software