Supplying Rapid Edge Protection solutions to the construction and groundwork industries.
QUALITY Along with our environmental targets, the overall quality of our product is at the forefront of our management processes. The on-site performance and life expectancy of our products relies heavily on the design and manufacture of a robust and quality assured system. Due to this, Rapid-EPS do not compromise when striving to meet these expectations. As such, the United Registrar of Systems undertake regular and stringent audits on the scope of our activities to ensure we meet the requirements set down to achieve registration to ISO 9001:2015.
Considerate Engineering ZERO WASTE TO LANDFILL
CONTENTS
A completely sustainable product which has been designed to meet the challenges and expectations of the construction industry today.
RECYCLE The system will be constantly exposed to the
Introduction .............................................................................4
Formwork Solutions . .............................................................22
Distributors..............................................................................6
Lift / Elevator Shaft Protection ..............................................23
RE-USE Rapid-EPS products are
harsh construction challenges of today so it is inevitable that eventually, after many uses, the components may become damaged and visually unacceptable. This doesn’t mean that the product is at the end of its life and that landfill is in sight! The robust design of Rapid Fall Prevention Systems will ensure that
Rapid Panel..............................................................................8
Bay Safe End Panel . ...............................................................24
Rapid-EPS Ltd are constantly reviewing the aspects and impacts which could be placed on the environment by the activities associated with the manufacture of our construction safety products. Environmental awareness is key to our success in delivering a sustainable product, therefore we employ the services of the United Registrar of Systems to conduct regular and stringent audits on the processes surrounding the manufacturing of Rapid-EPS products. The annual audits ensure our manufacturing processes have minimum impact on the environment and the scope of our activities meet the requirements set down to achieve registration to ISO 14001:2015.
all designed and manufactured for repeated usage.
Concrete Frame Solutions .....................................................10
Bay Safe System .....................................................................25
Steel Frame Solutions ............................................................12
Training .................................................................................26
The robust design and substantial coating ensures that the system can be constantly placed back into service.
Timber Frame Solutions ........................................................14
Product Support ...................................................................28
Staircase Solutions .................................................................16
Research & Development .....................................................29
On return from site, a full inspection of the product would take place to identify any possible defects.
Free Standing.........................................................................18
Client Testimonial ..................................................................30
extended product life is achieved with minimum impact on the environment. The process of repairing and re-coating the components has minimum
Demarcation ..........................................................................19
Clients....................................................................................31
If a defect is found, the design of the product ensures that, with minimum repair or refurbishment, the system can soon be serviced and placed back into stock for future use.
Trench Guard.........................................................................20
impact on the environment and ensures that the product has extended life, is visually acceptable and fully compliant for placing back into service
A fully compliant system offering many years of service.
for many years
to come.
www.rapideps.com
2
3
A tested system that meets and exceeds the EPF standard for Full Height Containment
Rapid-EPS are an award winning British manufacturing company that has been supplying innovative edge protection solutions to the construction and groundworks industry for over a decade. Rapid-EPS are proud board members of the industry recognised Edge Protection Federation and ensure all of our products not only meet, but exceed BS EN13374:2013+A1.2018 and other Global Standards through Lloyds British certification. Our famous Rapid Post allows the system to be:- • Installed 10 x faster than existing drill and fix systems • Installed using no drills or fixings • Installed with zero penetration to the concrete • Ideal for post tension slabs • Easy to install requiring minimal training The innovative compression Rapid Post , with its ease of installation and overall performance, has become the default solution for many companies around the world with its unrivalled 2.7m fixings centres - the widest on the market. Rapid-EPS employs over forty people at our 32,000 sq ft headquarters which houses our training and EN 1090 approved manufacturing facility- Certificate Number 20154PR/A/0001/UK/En . Rapid-EPS has a wealth of expertise in providing fall protection for the Concrete Frame, Steel Frame, Metsec and Structural Timber Frame industries and offers the most efficient edge protection system available to the construction industry today.
Standard Height
Full Height Containment
Extended Height
Over 2 million linear metres of hired incident free installation from distributors around the world.
Proven to be 10 x faster than traditional systems.
Over 500,000 Linear Metres of core equipment manufactured. That's the same distance from Leeds to Dundee.
Visit our 500m² in house industry approved training facility in Leeds.
Providing technical suppport and system advice to leading contractors around the world.
SCAN ME TO WATCH MORE (DOWNLOAD THE QR SCANNER APP)
www.rapideps.com
4
5
GLOBAL DISTRIBUTORS
WORLDWIDE DISTRIBUTORS The Rapid-EPS range of products has proven to be a success on an international level. Our products are available from:
A global success story
TARGET MARKETS FOR FUTURE EXPANSION We are currently looking to introduce the Rapid-EPS range of products into more markets and would welcome interest from potential distributors from:
Aluma/Safway Houston, TX Marion, OH Linden, NJ Portland, OR Sacramento, CA Phoenix, AZ Tampa, FL
Impact Fence Rentals inc. Toronto, Canada SGB LLC
Dubai, UAE Doha, Qatar
RAPID-EPS Pty LTD Melbourne, Australia Rapid-EPS Headquarters Leeds, United Kingdom
Sydney, Australia Brisbane, Australia Perth, Australia Adelaide, Australia
South Africa Malaysia Singapore South Korea Hong Kong
Atlanta, GA Antioch, IL
UK/Europe Hunnebeck Lyndon SGB Alinco Inc. Japan
Baltimore, MD Las Vegas, NV Buckley, WA Grand Ledge, MI Fontana, CA
www.rapideps.com
6
7
RAPID PANEL More than just a barrier
The robust design has unrivalled fixing centres of 2.7m which is the largest available on the market. Rapid-EPS products are fully tested by Lloyds British test house and have been proven to meet and exceed the test requirements set out in BS EN13374:2013+A1.2018 for Class A & Class B along with other global standards.
RAPID PANEL FULL - 2.9m EU003 / NA003
RAPID PANEL HALF - 1.4m EU005 / NA005
RAPID PANEL QUARTER - 655mm EU085 / NA085
WORKTHROUGH PANEL FULL - 2.9m EU119
WORKTHROUGH PANEL HALF - 1.4m EU120
PANEL STILLAGE EU014/NA014
For added protection, all new Rapid Panels are shipped in purpose built and stackable transportation aids. They are then shrink wrapped to ensure the product is in pristine condition upon arrival to you.
www.rapideps.com
8
9
SYSTEM LOADING AVAILABLE ON REQUEST.
CONCRETE FRAME SOLUTIONS
ALTERNATIVES TO RAPID POST
KERB GRAB EU009/NA009
DUAL PURPOSE STAND EU007/NA007
CONCRETE SOCKET BASE EU010/NA010
Offering a whole new approach to working safely at height
This simple but very robust solution uses the Standard Support Post and has been tested to exceed global safety standards. • Robust tensioning facility • Adjustment range 150mm- 580mm • Allows fixing to problematic areas including bridge work and parapets with upstands of up to 580mm
The Dual Purpose Stand has been fully tested and proven to exceed global safety standards for Edge Protection/Fall Prevention. • Installed in just minutes with two anchor bolts • 2.7m fixing centres • Galvanised finish
The concrete Socket Base can be installed on any concrete surface either at a pre-cast stage using inserts, or by drilling and installing at a later date.
The innovative Rapid Post with its ease of installation and overall performance, has become a default safety solution for many companies around the world. Rapid Post offers significant savings in time and labour.
RAPID POST - EU001/NA001 • 10x faster than traditional drill and fix systems • No tools required! No drilling or fixings • Minimal training required • Fully compliant with BS EN13374:2013+A1.2018 Class A and B & other global standards • Zero penetration of the concrete • Ideal for post tension slabs • Compression mechanism guaranteed for two million cycles • Safety device on post clearly indicates correct assembly • Single, extended or full containment edge protection for total enclosure • Rapid Post extends up to 3.4 metres • Extend containment height by attaching Rapid Clamps
RAPID POST EXTRA - EU002/NA002 • Longer post extends up to 4.3 metres • Exactly the same benefits as Rapid Post
DUAL PURPOSE STAND EXTRA HEIGHT EU007-EH/NA007-EH All of the benefits of Dual Purpose Stand but gives the ability to provide extended height containment.
SLAB GRAB EU008/NA008
RAPID CLAMP & RAPID LATCH Add Rapid Clamps to Rapid Post for extended height or add Rapid Latches for full containment edge protection.
A fully tested solution where Rapid Post or drill and fix solutions are precluded. • Adjustable height on floor slabs: 100mm- 325mm thickness • Robust tensioning facility • Install a safe working area in minutes
EU020/NA020
EU021/NA021
ADJUSTABLE PARAPET BRACKET EU038/NA038
A versatile solution for face mounting to most parapets. Like all other Rapid-EPS installations, the system can be installed at the unrivalled centres of 2.7m. With both vertical and horizontal adjustment, the solution lends itself to most challenges.
BASKET STILLAGE EU015/NA015
RAPID POST/EXTRA STILLAGE EU013/NA013
For added protection, all new Rapid Posts and ancillaries are shipped in purpose built and stackable transportation aids. They are then shrink wrapped to ensure the product is in pristine condition upon arrival to you.
SYSTEM LOADING AVAILABLE ON REQUEST.
11
www.rapideps.com
10
STEEL FRAME SOLUTIONS
WEB FIX BRACKET EU042/NA042
SACRIFICIAL SOCKET MADE BY OTHERS
BOLT ON SOCKET EU103/NA103
The Sacrificial Socket system is commonly used on steel frames and requires the steelwork contractor to weld the socket to the perimeter beam at centres specified by others. Utilising the steel frame Support Post and Rapid Panel , the installation can be carried out swiftly and safely at ground level.
The Bolt On Socket system is commonly used on steel frames and requires the steelwork contractor to bolt the socket to the top of the perimeter beam at centres specified by others. Utilising the steel frame Support Post and Rapid Panel , the installation can be carried out swiftly and safely at ground level.
The most popular method of fixing to the steel frame is by utilising the versatile Web Fix Bracket . The bracket offers a vertical and horizontal indexing facility and positioning of the fixing holes for the bracket would be modelled by others using the most up to date software packages. This product can cater for overhangs of up to 250mm beyond the face of the beam web.
We are a leading supplier of solutions for fixing to steel structures
Where conditions allow, the Rapid Edge Protection System can be installed at ground level prior to erecting the steel frame which significantly reduces exposure to the dangers of working at height. Pre-indexing of the system ensures the barriers are suitable for all following works. • The most efficient edge protection system available with fixing centres tested to 2.7m. • Single or extended height edge protection. • Edge protection barriers in three sizes: full (2900mm), half (1400mm) and quarter (655mm). • Barriers are incredibly light but robust, allowing edge protection for leading edge, internal voids and lift / elevator shafts. • Flexible components allowing simple indexing to suit variable slab details.
I-BEAM CLAMP EU024/NA024
WEB FIX EXTENSION BRACKETS EU091/NA093 - 200mm Extension EU092/NA092 - 400mm Extension
The solution is used for areas where Web Fix or Sockets are not suitable, or where edge protection requirements have not been considered at an earlier stage. Again, utilising the steel frame Support Post and Rapid Panel , the system is fully compliant with global safety standards. SYSTEM LOADING AVAILABLE ON REQUEST.
Increase the capabilities of the standard range of bracketary from 250mm out to 1000mm beyond the face of the beam web.
www.rapideps.com
12
13
A revolution in CLT edge protection TIMBER FRAME SOLUTIONS
TIMBER SOCKET BASES EU010/NA010
DUAL PURPOSE STAND EXTRA HEIGHT EU007-EH/NA007-EH All of the benefits of Dual Purpose Stand but gives the ability to provide extended height containment.
ADAPTER FACE PLATE EU041/NA041
Web Fix Bracket (with four fixings using Adapter Face Plate ) incremental indexing facility to cater for overhangs of upto 250mm.
Surface fix only and requires installation by three or four Heco Topix fixings (supplied by others) depending on which option you require.
As with our Steel Frame products, where conditions allow our Timber Frame solutions can be installed at ground level. The system requires no secondary fix. The barrier is installed on the section using the standard structural timber equipment. • The most efficient edge protection system on the market, offering the widest fixing centres at 2.7m, leading to fewer components and vastly reducing installation time. • Single or increased height edge protection for total enclosure. • Edge protection barriers in three sizes: full (2900mm), half (1400mm) and quarter (655mm). • Barriers are incredibly light but robust, allowing edge protection for leading edge, internal voids and lift/elevator shafts.
UNIVERSAL FACE MOUNT BRACKETS EU043/NA043 Face fix bracket which allows for a Socket Base to be fitted. This is then paired with a Standard Support Post and Rapid Panel . Bracket requires five Heco Topix screws (supplied by others).
DUAL PURPOSE STAND EU007/NA007
A proven solution which has been used for years by contractors around the world. As with all Rapid-EPS products, the Dual Purpose Stand has been fully tested and proven to exceed global safety standards for edge protection/fall prevention. A highly visible and efficient solution with a galvanised finish, the Dual Purpose Stand requires installation by means of two Heco Topix screws (supplied by others). With 2.7m fixing centres, the versatile solution can be installed in minutes.
www.rapideps.com
14
15
WIND LOADING & CALCULATIONS AVAILABLE ON REQUEST.
Offering protection to all configurations of stairs & stairwells STAIRCASE SOLUTIONS
NEWEL POSTS Standard Post - EU028/NA028 Left Hand Post - EU029/NA029 Right Hand Post - EU030/NA030
CENTRE POST CLIP EU071/NA071
Holds the Debris Guards in place on stairs when fitted externally to cover any gaps on varying stair pitches.
There are 3 stairwell posts to suit every eventuality. The regular stairwell post has antiluce fitting on a single side and the right and left posts have fittings facing out at 90 degrees.
STAIR CLAMP EU031/NA031
The innovative telescopic Stair Rail System with Debris Guard can provide fall protection to the most challenging areas. With fail safe fittings, the solution can be installed quickly by means of drill and fix, threaded inserts, pre-cast sockets or clamping.
The Stair Clamp can be quickly installed on any precast stairs when speed is a necessity.
HANDRAILS SR0 -EU078/NA078 = 280mm-300mm SR1-EU060/NA060 = 390mm-440mm SR2-EU072/NA072 = 440mm-500mm SR3-EU073/NA073 = 500mm-590mm SR4-EU074/NA074 = 590mm-720mm SR5-EU033/NA033 = 720mm-930mm SR6-EU061/NA075 = 930mm-1300mm SR7-EU032/NA032 = 1300mm-2000mm SR8-EU062/NA062 = 1900mm-3000mm We have a selection of Handrails spanning from 280mm to 3000mm to cope with any configuration.
DEBRIS GUARDS DGL1-EU047/NA047 = 340mm-510mm DGL2-EU075/NA079 = 510mm-850mm DGL3-EU076/NA076 = 850mm-1530mm DGL4-EU077/NA077 = 1530mm-2840mm DGS1-EU064/NA064 = 1260mm-1940mm DGS2-EU045/NA080 = 1760mm-2940mm DGS3-EU067/NA067 = 2760mm-4940mm We have a selection of Debris Guards spanning from 390mm to 4940mm to cope with any configuration.
STAIR RAIL CONNECTOR BRACKET EU034 - UK & EUROPE NA034 - NORTH AMERICA The Stair Rail Connector Bracket can be quickly installed on any Rapid Post positioned on a landing to provide handrails when drill and fix is not an option.
CONCRETE SOCKET BASE EU010/NA010
The Concrete Socket Base can be installed on any concrete stair, either at a precast stage using inserts, or by drilling and installing at a later date.
www.rapideps.com
16
17
FREE-STANDING EDGE PROTECTION The user friendly system that requires zero penetration to the concrete slab
DEMARCATION / PEDESTRIAN CONTROL THIS IS NOT EDGE PROTECTION PEDESTRIAN SEGREGATION & DIRECTIONAL BARRIERS Ensure your site visitors and operatives are safely directed away from potential hazard areas by utilising the simplistic pedestrian directional barrier solution.
Quick and easy to use, the solution can be installed in minutes by assembling just three standard components.
The Free-standing Footplate forms a sturdy and durable fall protection system for flat roofs and slab edges. It combines with our existing Dual Purpose Stand and Rapid Panel which has been designed to be extremely lightweight for installation by one person. An Ideal system that folds flat for storage and transportation.
DEMARCATION Utilising the same three Free-standing components, safe compounds for use as waste disposal or storage areas can be created in just minutes.
• Robust rubber base to prevent slipping • Zero penetration to the working surface
• Designed and tested to work with 75 kg (165lbs) ballast per footplate • Product to be positioned a minimum 2m from the leading edge • System designed to meet and significantly exceed BS EN13374:2013+A1.2018 Class A • System meets and exceeds OSHA Standard 1926.502 • For permenant free-standing edge protection refer to BS EN13700
www.rapideps.com
18
19
TRENCH GUARD
TRENCH BOX CLAMP TG003
TRENCH SHEET CLAMP TG002
An adjustable clamp with a speed thread that is compatible with box thickness from 30mm up to 125mm.
An adjustable clamp with a speed thread that is compatible with sheets up to 30mm.
Protect work personnel from open excavations and falling debris
• Trench Guard conforms to the latest temporary edge protection legislation BS EN13374:2013+A1.2018 and OSHA 1926.502. • Trench Guard uses the robust Rapid Panel which has a built-in toe board to prevent debris from falling onto operatives working below. • Fits all types of trench sheets and piles. • Trench Box/Sheet Clamps can be positioned at unrivalled 2.7m centres when combined with the Rapid Panel . • Lightweight for ease of use by site operatives and quick installation when used in conjunction with Rapid-EPS post and clamps.
COLLAPSIBLE LADDER PLATFORM TG007 The Collapsible Ladder Platform allows for a safe and easy entry/exit of a trench. This platform collapses inside itself to save space during transportation and storage.
TELESCOPIC SHEET/BOX CLAMP TG032
Adjustable with the aid of a telescopic section held with a Rapid Pin . It is compatible with boxes from 0mm to 270mm.
www.rapideps.com
20
21
Rapid-EPS wetdeck equipment is for use on any type of formwork FORMWORK SOLUTIONS • The Wet Deck Panel maintains safe height above concrete pour. • Increased height toe board to contain debris • Quick connect system eliminates tie-wire. • Our standard range includes brackets to fit onto most timber and aluminium formwork systems.
LIFT/ELEVATOR SHAFT PROTECTION Offering a whole new approach to lift/elevator shaft safety
LIFT SHAFT GATE EU040/NA050
Unlike any other system available to the construction industry, the unique Lift Shaft/Elevator Gate offers protection to multiple core openings with just one gate. The solution utilises light but extremely robust and user friendly components which features a secure key activated locking gate. Standard Rapid-EPS components such as the innovative Rapid Post and Rapid Panel are deployed when completely securing the protected areas. This means there is no need for any penetration of the working surface and multiple lift/ elevator shafts are protected in just minutes. As with all Rapid-EPS components, the Rapid Lift Shaft/Elevator Gate has been certificated by Lloyds British in line with BS EN13374:2013+A1.2018. Using standard Rapid-EPS components in conjunction with a Rapid Lift Shaft/Elevator Gate , a secure compound can be built to protect valuables and control access.
WET DECK POST EU107 / NA108 Extended height post to accept the taller Wet Deck Panel .
RAPID PANEL EU003/NA003 EU005/NA005 EU085/NA085
WOOD BEAM CLAMP EU036 Complies with BS EN13374:2013+A1.2018 Class A
WET DECK PANEL EU0106/NA107 NA113
RAPID POST EU001/NA001 EU002/NA002
Galvanised panel with an extended height toe board.
www.rapideps.com
22
23
BAY SAFE END PANEL Scaffolding Solutions • Allows fast installation of Loading Bay area using traditional tube and fitting. • Challenges the concept of Loading Bay installation safety. • Reduces the time to install end protection to the Loading Bay from set out to final use. • Works as an advanced guardrail whilst building the Loading Bay . • Works as part of the Rapid Bay Safe System . • Complies with BS EN13374:2013+A1.2018 Class A.
BAY SAFE SYSTEM
• The robust but user friendly Bay Safe System is suitable for use with telehandler or forklift trucks on most low rise structures. • The Bay Safe System is available in 2.2m (7'-2”), 2.8m (9'-2”) and 3.4m (11'-2”) lengths with custom lengths available on request. • Bay Safe works in harmony with all our existing systems and is also suitable for use with traditional scaffolding. • The system is fully compliant with BS EN13374:2013+A1.2018 and OSHA 1926.502 and is quality assured and tested by Lloyds British. • Finished in a durable powder coating, available in red as standard or your company's colours on request. • A well-balanced design means the system can be operated by one person.
LOADING BAY GATE ARMS SC006
PIVOT FOR TUBE SC007
END BAY PANEL SC009
2.2m - SC005
2.8m - SC004
3.4m - SC003
www.rapideps.com
24
25
TRAINING
EPF industry approved training facility
TRAINING COURSES AVAILABLE AT OUR RAPID TRAINING CENTRE
TRAINING AVAILABLE ON SITE EPF Operatives (1 Day) Rapid-EPS Product Familiarization Training
With 500 square metres of industry approved training and demonstration area at Rapid-EPS , we believe we have all levels of safety covered. With Concrete Frame, Steel Frame, Structural Timber Frame and Wet Deck models installed, we can ensure the industry standard for selection and use of temporary edge protection is fully understood by everyone. At our recently upgraded training centre in Leeds, product training and training covering the standard for temporary edge protection systems, BS EN13374:2013+A1.2018 is available to all of our customers. The level of training undertaken at our training centre will involve practical sessions including product installation, hazard identification and a theory session. All delegates will be required to complete the formal Edge Protection Federation test paper. On completion of a successful test paper, the delegates will be issued with the Edge Protection Federation card which will be valid for 5 years. Further to our well received Edge Protection Federation operatives course, we are pleased to offer the recently developed Managers course and Rapid-EPS Instructors course.
EPF Operatives (1 Day) EPF Managers (1 Day) EPF /Rapid-EPS Instructors (2 Day)
Working At Height/Harness Awareness (1 Day)
Working at Height/Harness Awareness (1 Day)
On completion of our courses, delegates will receive hard hat badges for the level of training they have undertaken.
www.rapideps.com
26
27
PRODUCT SUPPORT
RESEARCH & DEVELOPMENT Award winning in-house R&D team & purpose built testing facility
With a dedicated Product Support Manager on hand, Rapid-EPS can arrange site visits to discuss and agree bespoke solutions for a variety of needs.
Site demonstrations and site-based training can be carried out with the help of our well-equipped demonstration van. The demonstration van allows Rapid-EPS to bring important equipment and product knowledge to the user, and allows for some levels of introductory training to be delivered at site.
With a wealth of expertise in manufacturing fall protection for the Concrete Frame, Steel Frame and Timber Frame industries, all products designed and manufactured by Rapid-EPS are tested in accordance with the most up to date industy standards. All of the technical department are Rapid-EPS & EPF industry trained and approved to ensure they have full understanding of how and where the product is going to be used. The R&D team works closely with the sales team as the direct link to the customer. Every customer has different needs, so internal communication across the company is of crucial importance. The R&D Department also focus on midterm proactive development and long term research. This includes quality improvement, operational efficiency, and analysing every stage of production to ensure the business is keeping up with demand and high standards expected from its worldwide clients.
29
www.rapideps.com
28
CLIENT TESTIMONIAL
Rapid-EPS are proud to have worked with great clients around the world CLIENTS
Demolition work was being carried out by a 72 tonne hi-reach machine to adjacent slabs & steel work.
During the inspection I have not noticed any defect, deflection or dislocations from their initial installation. The product is very easy to check that everything is installed correctly with a clear visual indicator at the top of the post. Having the wide post centres means that installation is quick and easy which was critical for this job. I had 3 members of staff erecting the equipment with ease. The Rapid system was great and I would recommend using this on future sites. Lukasz Salamon Site Manager - Kier Construction
www.rapideps.com
30
31
Rapid-EPS Ltd - Unit D, Treefield Industrial Estate, Gelderd Road, Gildersome, Leeds, West Yorkshire, LS27 7JU, United Kingdom
Head Office: T: +44 (0)1132 528883 E: sales@rapideps.com W: www.rapideps.com 080122V5
Page 1 Page 2-3 Page 4-5 Page 6-7 Page 8-9 Page 10-11 Page 12-13 Page 14-15 Page 16-17 Page 18-19 Page 20-21 Page 22-23 Page 24-25 Page 26-27 Page 28-29 Page 30-31 Page 32Made with FlippingBook - professional solution for displaying marketing and sales documents online