Manway Cover Gasket (1 per year or as necessary) – SPUN MANWAY ONLY
1) Occasionally the manway cover gasket may require replacement. 2) Fully remove the old gasket. Use a solvent such a lacquer thinner to remove all traces of the old adhesive. Follow all safety precautions when using any solvent; dispose of cleaning materials such as rags so as not to create a fire hazard.
3) Remove 2” of the paper backing from one end of the new gasket. 4) Align the end of the new gasket and firmly press it into position on the flat of the manway cover.
5) Carefully install the remainder of the gasket around the flat (avoid the rounded cover edges) while simultaneously removing the backing. 6) The replacement gasket is slightly longer than required, cut the free end so you have about 2” more gasket than needed. Leave the paper backing on the remaining 2” of gasket and overlap onto the beginning end of the gasket. 7) Use a razor knife or scissors to cut diagonally through both layers of the overlapping gasket.
100
GARN® WHS 1000 and WHS 2000 Manual | © HY-C® Company LLC | October 2024
Made with FlippingBook - professional solution for displaying marketing and sales documents online