UNPACKING AND ASSEMBLY : FACTORY PREINSTALLED ITEMS:
C. UNPACKING AND ASSEMBLY The GARN® unit is shipped with most of its components inside the combustion chamber. Additional components and accessory items may be shipped within the tank proper . DO NOT REMOVE THE FIREBRICK . It is preinstalled correctly at the factory.
The following components should be removed from the combustion chamber:
Digital controller
o
Digital controller sensors
o
Air intake hood
o
Low water cut off/sensor stem
o
Water treatment test kit Water filter and housing
o
o
o Motor mount plate, motor and blower wheel o Hot water return assembly o Bent flow stabilizer o Cleanout plates, gaskets, and SS gasket savers
COMPONENTS TO UNPACK CAN VARY WITH TYPE OF INSTALLATION AND ACCESSORIES ORDERED. Compare the packing slip that came with your unit to the components
unpacked.
FACTORY PREINSTALLED ITEMS The following items are assembled and properly installed at the factory:
Firebrick with insulation backing pads
o
o Ceramic reaction chamber tube (2 sections) with rear insulating ring o Lower nozzle heat shield o Loading door
MANWAY COVER AND GASKET A galvanized steel manway cover is provided with all GARN® WHS equipment. The manway cover:
Provides mounting for the sensor stem. Prevents debris from entering the tank. Is a pressure relief for the GARN® WHS.
•
•
•
• Minimizes evaporation of the storage water.
11
GARN® WHS 1000 and WHS 2000 Manual | © HY-C® Company LLC | October 2024
Made with FlippingBook - professional solution for displaying marketing and sales documents online