INSTALLATION : UNIT PLACEMENT
CLEARANCE TO CEILING
• Vertical space requirements for access to the manway cover on top of the unit, to allow for periodic visual inspection of the inside of the GARN unit. This also facilitates entry into the GARN unit if required for cleaning.
When locating the GARN® WHS unit, consider the following carefully:
• Traffic patterns past the unit: service doors, any overhead doors, pump locations, etc. • Source of electrical power and location of electrical panel. • The routing and insulation of piping to the heating system. • Location of wood fuel storage. • Unit position considering where heat is to be delivered (i.e. distance to other buildings, etc). • Sufficient space for heating system pumps and controls. • Position and type of flue (horizontal or vertical) with reference to other nearby buildings.
NOTE:
• If installing a combustion air damper, increase the rear clearance from 8” to 24” minimum to allow sufficient room for damper installation and maintenance.
GARN WHS 1000 and WHS 2000 Manual © HY-C Company LLC - September 2024
18
Made with FlippingBook - professional solution for displaying marketing and sales documents online