INSTALLATION : COMBUSTION AIR INLET
INLET HOOD INSTALLATION WITH LAP OR UNEVEN SIDING If the siding on the exterior does not create a flat surface, cut a rectangle in the siding large enough to fit a bumpout for the hood. Seal, flash, and caulk the bumpout following best practices to ensure that the bumpout does not become a weather/moisture entry point to the building or building wall assembly. Secure the hood with 4 screws, one near each corner of the hood.
29
GARN® WHS 1000 and WHS 2000 Manual | © HY-C® Company LLC | October 2024
Made with FlippingBook - professional solution for displaying marketing and sales documents online