INSTALLATION : ELECTRIC HEATING PACKAGE INSTALLATION
ELECTRIC HEATING PACKAGE INSTALLATION For instructions on installing, wiring, and operating the Electric Heating Package, please reference the ELECTRIC HEATING PACKAGE OWNER’S MANUAL available at www.garn.com A paper copy of the Electric Heating Package Owner’s Manual is included with the purchase of the Electric Heating Package. SPARK ARRESTOR Each GARN® WHS Vertical flue unit is supplied with a spark arrestor. The spark arrestor is manufactured from high-quality 316 stainless steel mesh for high temperature application and corrosion resistance. The spark arrestor complies with NFPA 211 “Standard For Chimneys, Fireplaces, Vents, And Solid Fuel-Burning Appliances”(2013) section 4.6.4 Spark Arrestors . DO NOT USE A SUBSTITUTE SPARK ARRESTOR. THE SPARK ARRESTOR MUST COMPLY WITH NFPA 211 SECTION 4.6.4 The spark arrestor is installed in the upper cleanout area of the blower housing and can be accessed for cleaning by removing the upper cleanout plate and gasket.
A spark arrestor is required for every installation with one specific exception: horizontal exhaust units that discharge in to a barrel with a metal screen. For the horizontal exhaust units that discharge into a metal barrel with a screen (see the picture in the HORIZONTAL SIDEWALL FLUE section on page 46 of this manual), then the barrel screen acts as the spark arrestor.
The spark arrestor is factory cut to approximately 24” x 4-1/4”.
USE SAFETY GLOVES WHEN HANDLING THE SPARK ARRESTOR. THE SPARK ARRESTOR MAY HAVE SHARP EDGES.
36
GARN® WHS 1000 and WHS 2000 Manual | © HY-C® Company LLC | October 2024
Made with FlippingBook - professional solution for displaying marketing and sales documents online