INSTALLATION : SPARK ARRESTOR
INSTALLATION:
4. Insert the coiled screen into the cleanout.
1. Roll the flat screen into a cylinder of approximately 6” to 8” in diameter.
5. Allow the coil to expand (like a spring) into the upper cleanout opening.
2. Overlap the edges of the screen, DO NOT trim the screen.
6. Reinstall the flow straightener.
3. Remove the upper cleanout plate and gasket.
7. It is ok if the barbs on the one side of the screen are proud of the gasket mounting
GARN WHS 1000 and WHS 2000 Manual © HY-C Company LLC - September 2024
37
Made with FlippingBook - professional solution for displaying marketing and sales documents online