INSTALLATION : GARN® WHS/ETS DIGITAL CONTROLLER
WIRING WITHOUT COMBUSTION AIR DAMPER
LEAVE JUMPER INSTALLED BETWEEN “END” AND “SW” CONTACTS.
WIRING WITH COMBUSTION AIR DAMPER Remove the white jumper wire on the “END SW” contacts. Connect the yellow leads from the damper motor to the “MOTOR” contacts and the red leads from the damper to the “END SW” contacts.
59
GARN® WHS 1000 and WHS 2000 Manual | © HY-C® Company LLC | October 2024
Made with FlippingBook - professional solution for displaying marketing and sales documents online