INSTALLATION : GARN® WHS/ETS DIGITAL CONTROLLER
3. Both zip ties shown tightened to allow the two halves to bend. Cut off excess length.
6. Push the fitting thru the hole, firmly seating it onto the cover.
7. Slide the black nylon retaining nut over the wire and onto the fitting. Tighten securely.
4. Turn the cover sections over so the tabs are in the up position. Push the Teflon gasket onto the 4 tabs, aligning the off center hole.
8. Flip the cover over and place it on the manway access collar. Lift both halves in unison. Adjust the cover to center on the access collar. Don’t drop into the GARN® unit.
5. Place the 3” Teflon disc onto the Low Water Cut Off fitting and feed the wire thru the hole. Fit is somewhat snug.
64
GARN® WHS 1000 and WHS 2000 Manual | © HY-C® Company LLC | October 2024
Made with FlippingBook - professional solution for displaying marketing and sales documents online