OPERATION : CONDENSATION LEAK POINTS DURING COLD FIRING
CONDENSATION LEAK POINTS DURING COLD FIRING
When firing your GARN® with a tank temperature below 70°F, condensate water may leak out of the upper cleanout and/or flue. Water may also leak from the overflow pipe due to
thermal expansion. Both are normal. It is STRONGLY suggested to perform the first two cold firings before the unit is insulated or enclosed. Otherwise, build in accommodations for dealing with condensation when performing a cold firing. Damage or staining of sheet rock may occur otherwise.
OVERVIEW OF THE DIGITAL CONTROLLER
BUTTONS AND SWITCHES CONTROL
FUNCTION
“On/off” power switch
Turns controller on or off
Select between wood only operation or wood with electric backup
“Wood or Wood/ Electric” selector switch
“Start” button
Activates the combustion blower
Switch between the various sensor temperatures on digital readout Illuminates the digital readout for better visibility in low light
“View” button
“Back Light” slide switch
89
GARN® WHS 1000 and WHS 2000 Manual | © HY-C® Company LLC | October 2024
Made with FlippingBook - professional solution for displaying marketing and sales documents online