11) Using a long, narrow screw; pull the round portion of the gasket from under the door skin. Move around the entire gasket until the skin sits on the tadpole with the round portion totally clear of the skin. 12) Using the point of your screw, put it in a screw hole nearest to your mark of the bottom screw hole. Rotate skin until holes align. 13)Put point of screw through both holes to keep door skins aligned. Repeat with the screw holes directly opposite the first hole. 14) Using the original sheet metal screws you removed, place a screw in an empty screw hole. Using a variable speed power drill or socket wrench, rotate the screw several times COUNTERCLOCKWISE to separate the gasket fibers. 15) Then turn the screw clockwise until tight. Repeat in the hole opposite the first. Go around door skin until all screws are in and tight. 16) Reinstall the inner door assembly by threading it (rotating clockwise) back onto the large bolt that protrudes from the center, inside face of the outer door skin.
99
GARN® WHS 1000 and WHS 2000 Manual | © HY-C® Company LLC | October 2024
Made with FlippingBook - professional solution for displaying marketing and sales documents online