RENTALS
RENT THE BEST. PAY LESS.
LOCATIONS Best Price Guarantee Open-ended rentals keep it as long as you need Transit time NOT included in your rental period
EXPLORE!
Easy rent-to-own option
Process Meter • Measure AC/DC volts, AC/DC current, resistance, continuity, & frequency (to 20 kHz) • 20 mA current source/simulate, simultaneous mA & % scale readout, & 24 V loop power supply • HART mode setting with loop power (adds 250 Ω resistor)
• 320 × 240 (76,800 pixels) infrared resolution • MSX (Multi-Spectral Dynamic Imaging) image enhancement • 640 × 480 touchscreen: add detailed notes to images and stream video • Store & share images using FLIR Ignite™ cloud service Thermal Imaging Camera MODEL E8 PRO-RENTAL
MODEL 789-RENTAL
FLEXIBLE & AFFORDABLE RENTAL OPTIONS!
LOCAT DISPON LOCAT DISPON
RENT AVAILABLE RENT AVAILABLE
Only use these with Dawn’s approval
SENSIT
Technologies
Paper Moisture Meters • For testing paperboard, corrugated stock, & paper cores & tubes • Accurate direct contact measurement & availability of special application electrodes • Alarms for user-selected MC level set point • 100 readings saved including High, Low, Average, & Standard Deviation • Custom display with auto backlight
Multi-Gas Detector
Mixed Signal Oscilloscopes
• Displays up to 4 gases simultaneously: LEL (%volume & ppm), O 2 , CO, H 2 S & HCN (optional) • “Tick” control to pinpoint leak location
• Real time sampling rate of analog channel 2 GSa/s & digital channel 1GSa/s • Waveform capture rate up to 1,000,000 wfms/s • 2 or 4 analog channels & 16 digital channels with storage depth of 56 Mpts each channel • Advanced FFT analysis • Wide array of trigger options
• Internal pump for fast sampling • Bright graphic display with LED warning lights & audible alarm • Certified intrinsically safe design
STARTING AT
$699 30 STARTING AT
ON SALE!
$445
$2769 06
SERIES MSO2000
SERIES PX
MODEL GOLD G2 4 GAS
• Measure voltage, current, & power right on the cable • Supports single to three- phase, 4-wire circuits Power Clamp Data Loggers
Bench Scales
Use the EBT731 Balometer ® Capture Hood to quickly and accurately measure supply and return air volumes to verify that your system is delivering the right airflow to every space. Get Your HVAC System Winter-Ready with TSI Tools HM Manometers are used to balance hydronic heating and cooling systems, to check pump performance and to set balancing valves.
•7 application modes: weighing, parts counting, checkweighing, percent weighing, animal/dynamic weighing, display hold & accumulation • Bright LED display shows the results clearly • Uses either AC power or rechargeable battery • Menu lock switch, up-front level indicator & integral weigh-below hook • RS-232 communication port
• Measure between 90V to 520V without metal contact • Measure & display harmonics up to the 13th order • Measure cables up to ø 30mm • Display measured values as a graph STARTING AT
SERIES PW3365 $554 60 STARTING AT www.itm.com | 1-800-561-8187 | information@itm.com GlobalTestSupply.com | 1-888-610-7664 | sales@GlobalTestSupply.com $4270 SERIES RANGER
Made with FlippingBook Online newsletter maker