2.3.3 Tolerance View When tolerances are used, you have the ability to display your results with your tolerance information. Select the TOL function and your results, including pertinent tolerance information is displayed collectively. In the Tolerance view, each coefficient occupies a row in the data table. If a test run has five (5) coefficients, there will be five (5) rows for each coefficient.
NOTE You cannot display statistics and tolerance at the same time.
The coefficients are listed on a row for each test run. The tolerance settings are displayed for all coefficients where a tolerance has been setup.
The deviation bargraph displays where the result resides relative to the tolerance range- high or low or within the range. Failed results are displayed in red.
The Comment cells allow the operator to include comments on this result or the test run in general. Select the cell and enter your comment.
Use the Scroll Bar to navigate the data table up/down to view other test runs.
Select to display Tolerances
The highlited test run (#3) indicates which test run is being displayed in the Results view. If a split graph-data view was shown, the graph would indicated for #3.
L2 Plus Data Table Standard Split Graph-Data view with Tolerance
34
Made with FlippingBook - professional solution for displaying marketing and sales documents online