2.1.1.5 Load Cell Status Indicator The Load Cell Status Indicator shows the full scale load capacity of the connected load cell sensor. The load cell symbol changes color to Yellow or Red depending on the sensor’s measured load versus its full scale capacity. Selecting the Load Cell Status Indicator displays the sensor’s characteristics, including its Overload History. All Starrett load cell sensors are compliant with IEEE 1451.4 (TEDS). These sensors are “plug & play”, e.g. your Starrett system automatically recognizes the sensor and its characteristics and performance specifications.
2.1.1.6 Limits Indicator During an active test run, an indicator will typically appear above or below the measured value in the Controller view. For example, if the active test step is “go to a compression load of 25N” a limit indicator will appear above the measured load value showing the target load of 25N.
Shows the current load being measured by load cell sensor.
Shows the target load limit is for compression.
Shows the target load limit for this test step, e.g. 25N
Load Cell Status Indicator - Top right on all displays
Select the Load Cell Indicator to view the attached sensor’s identification and characteristics. Overload History is displayed. The current load cell sensor’s full scale capacity is shown beneath the Load Cell Indicator symbol.
Shows the current distance traveled from Home position.
Shows the current crosshead velocity
Load Limit Indicator Displays target for active test run
Load Cell Sensor Status View
starrett.com
7
Made with FlippingBook - professional solution for displaying marketing and sales documents online