Use remote monitoring technology before, during and after construction for crucial data about the behavior of the tunnel, the ground and third party assets in the zone of influence.
REMOTE MONITORING FOR TUNNELS
Use remote monitoring technology before, during and after construction for crucial data about the behavior of the tunnel, the ground and third party assets in the zone of influence.
CHALLENGES ADDRESSING YOUR
Tunnel engineers have trusted Senceive technology for more than a decade. It is designed and built for the tough demands of underground projects and provides precise , reliable structural and geotechnical data to help you address the unique pressures and challenges of your tunneling project.
Limited Time
Limited Space & Difficult Access Compact, autonomous sensors will not interfere with your operations • No clearance issues due to small size • Measure where it matters most • No wires needed and therefore less risk of damage
Tough Conditions
Ideal where only short access windows are available • Installed in minutes • Works straight out of the box • Still working after 10 years
Long life performance
• Rugged instruments for construction site conditions • Withstands extremes of heat, cold, water and more • Robust mesh
networks can resist damage to elements without systematic loss of performance
www.senceive.com
1
Senceive solutions have been used in over a hundred tunneling projects in more than 20 countries over the last decade. They have been used in applications extending from just a few hours to 25 years .
Changing Needs
Protect People & Infrastructure
Stay on Budget
Adapt the monitoring system as your project progresses
Early warning of distress and defects without leaving your desk
Use cost-effective monitoring for cost-effective tunneling • Save money through reduced site visits and long life performance • Works straight out of the box • Increased confidence
• Flexible moving and fitting of sensors • Change settings without leaving your desk and share the data with your whole team • Integrate structural and geotechnical sensors
• Automated alarms
when trigger levels are breached • Early warning of failure in tunnel or damage to buildings above • Fewer site visits means reduced risk exposure
and productivity through reliable real-time data
2
Remote Monitoring for Tunnels
WIRELESS MONITORING FOR TUNNELS
Wireless monitoring plays a valuable role in the construction and maintenance of various tunnel elements and underground structures:
Refurbishment and structural modification, for example for strengthening, track lowering and electrification Monitoring movement of third-party buildings and assets
Shafts and diaphragm walls
Temporary works New construction
As with any of our wireless monitoring solutions, a typical tunnel monitoring system will comprise three key elements : sensors, a cellular communications gateway and an online data portal. For dense sensor networks and highly responsive reporting, choose our FlatMesh™
intelligent mesh platform. Where sensors are widely dispersed and where you need to transmit data through physical obstructions (including soil and rock) our long-range GeoWAN™ platform may be more suitable.
In order to relay data from the sensor positions deep underground to the Gateway that is typically located just outside the portal, repeater nodes may be used. Alternatively, Wi-Fi or ethernet connections can be used where available.
3
www.senceive.com
A wide range of sensors can be integrated with our platforms to provide geographically dispersed stakeholders with data including:
Convergence/ Divergence
Deformation
S enceive instruments can be supplied with a wide range of brackets and fixings for use at any angle on virtually any surface. Options include magnetic fixings for ferrous metal linings and mounting plates that use screws, bolts or adhesive for concrete. For brick and masonry structures a rigid aluminum beam with tilt sensors is often used to measure movement of the whole structure rather than individual bricks or blocks. FlexiMeasure, our flexible inclinometer solution can be fitted around a typical tunnel intrados in an hour.
Crack and joint movement
Lateral or vertical ground movement
Ground pore water pressure
Strain
4
Remote Monitoring for Tunnels
5
www.senceive.com
“
Installation of the optical displacement sensors was very straightforward and only took a few hours. We’ve had a few alerts, which provide an opportunity to check the cause. Train traffic and construction work have not been disrupted.
Gagandeep Sihrat Project Engineer, Big Apple Group
6
Remote Monitoring for Tunnels
Harnessing intelligent monitoring to keep people and infrastructure safe
info@senceive.com Contact us www.senceive.com
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8Made with FlippingBook flipbook maker