FACTORY IMAGE RACING TOOL CATALOGUE
TOP END ENGINE TOOLS
PISTON PIN TOOL Top quality tool for removing pressed in gudgeon pins. May be used with engine in frame, on single or multi cylinder engines. Fits all piston sizes from 40mm to 100mm and all piston pins from 12mm to 25mm. This includes all single cylinder engines from 50cc to 600cc and all sizes 2, 3 or 4 cylinder. Will not damage piston or con-rods during removal. Piston Pin Tool 00-068 • Interchangeable piston adapter dowels with ODs 14mm & 17mm • Centre stud of M8, so the piston pin must have a centre hole of 8mm or more • Body made of durable 6061 aluminum with Blue anodized finish • Fits all motorcycle and ATV piston pins • Works on both full skirt and short skirt pistons 2 and 4 strokes • Durable blue anodized finish with knurled finish for the best grip • Overall length of body 130mm • Sliding T-Handle top screw also with 14mm hexagon if need Piston Pin Tool 00-526 PISTON PIN TOOL • Economy piston pin pulling tool • Suitable for the removal of piston rings on most cars / vans / motorbikes / trucks etc. • Allows easy removal without breaking the piston ring • Used to remove and mount piston rings easily and quickly, without damage and bump of the piston rings • Smooth gripping edge to prevent damage to the piston ring • Suitable for piston rings from 50mm 100mm • Spring loaded tool • Soft rubber handles for comfort and grip when using this tool Piston Ring Expander Pliers 00-0175.DR PISTON BASE ALLOY HOLDER Alloy plate that slips under the piston to hold things steady when rebuilding the top end of the engine. the grove fits around the connencting rod and flat onto the crankcases then the bottom of the piston drops down onto it to keep the piston 100% up right as you lower the cylinder onto the rings. This makes fitting the piston into the cylinder much easier on 2 and 4 stroke engines. Piston Base Alloy Holder 00-004.TZ PISTON RING EXPANDER PLIERS • Professional tool for commercial or occasional use
00-068
00-526
00-0175.DR
00-004.TZ
COMPRESSION TEST FIR compression tester with adapters. Includes; dial gauge (Measures up to 300psi), 10-12mm and 14-18mm adapters which fit most gasoline engines. FIR Compression Tester 00-3350.FIR
00-3550.FIR
16
Made with FlippingBook - Online catalogs