FACTORY IMAGE RACING TOOL CATALOGUE
FORK SERVICE
FORK COMPRESSION VALVE TOOL Fork compression valve removal tool. For use with YZ125/250 2005, and YZF250/450 2005. Replaces Yamaha OEM YM-01500. For removing the compression valve from cartridge. 19mm drive hex / 36mm octagon. Manufactured out of billet 6061 T-6 aluminium. FIR Fork Compression Tool 00-391.FIR FORK COMPRESSION BOLT DRIVER Compression bolt removal tool. Fits; KTM SX/SX-F 2007-2013, KTM XC / XCF 2008-2013, Husaberg FX/SM 2010-2011, FE 2011-2013. • Allows you to properly torque the compression valve assembly during installation • Constructed from billet 6061 T-6 aluminium, with silver, hard anodized, finish • Hexagon End 17mm • Allows you to properly torque the compression valve assembly during installation FIR Fork Compression Bolt (Silver) 00-581.FIR FORK CAP REMOVER FIR 32mm Fork cap removal tool. This pin spanner is a dual purpose tool for the Showa SFF Air TAC Fork. This tool allows you to properly remove the fork cap as well as the compression base at the bottom of the fork. (Sold Each) FIR Fork Cap Remover Tool 00-8761.FIR - Surface Processing: Hard black Anodized coating finish. - Open wrench design for easy operation in small spaces. - Opposite end of the wrench is rod stopper to hold piston rod when removing piston inner cartridge. - This tool will allow you to remove the front fork cap without damage. Fork Cap Wrench 00-7765.FIR 48mm WP 00-7768.FIR 49mm KYB 00-7766.FIR 50mm Showa / KYB / WP 00-7767.FIR FORK CAP WRENCH - Fork Cap Wrench 48mm KYB Dual chamber cartridge fork, With rod stopper end. - The large end is for removing the top cap screw from the fork leg and the forked end is for holding the rebound adjusters, there's also a cool bottle opener in the middle. - Material: Aluminium 6061-T6.
00-581.FIR
00-391.FIR
00-7765.FIR
00-7766.FIR
28
00-8761.FIR
Made with FlippingBook - Online catalogs