3 and 4 compartment floor boxes Supplying power and data via raised floor solution offers many advantages for the modern office. Mita floor boxes give you access to power and data wherever it is required. Both the end-user and the installer can benefit from the accessibility.
Flush lid infill Flush lid infills of linoleum or brushed stainless steel are available as optional accessories.
Cable outlets and lid The cable outlets are lined with foamed plastic, preventing dirt from penetrating into the box. The lid can be rotated through 180 degrees to re-position the cable outlet in the opposite direction and can be removed in one simple operation.
Lockable lid On request.
Hinge Lid will release when opened in excess of 90 degree angle to prevent damage to box. Snap locks Snap-locks (plastic lid only) reduce the risk of cables pushing the lid open.
Strong cover Lid reinforced
with 3 mm steel insert plate
RCD/MCB/RCBO Protection The 3-compartment 100 and 130 mm box comes complete with a plastic cover to house a RCD/MCB/ RCBO unit, if required.
Pre-wired boxes available Reduce on-site installation time and avoid wiring errors. Fully assembled and factory tested.
Quick fix function For quick and easy installation, self locking tabs push fit into place to secure the box DIN rail kit and RCD/MCB/RCBOs may be purchased separately. (3 compartment 70 mm box comes complete with a metal blanking plate.)
Swivel fixing (optional)
Various knockouts Various knockouts per compartment for flexible conduits. 70 mm box - Ø 20 mm 100 mm box - Ø 20/25 mm 130 mm box - Ø 20/25 mm incl. one Ø 32 mm.
Cable retainers (optional)
Metal compartment dividers Ensure good separation of power and data.
Metal base box Base box in three different heights, 70, 100 and 130 mm.
To hold cables in place and prevent them being pulled out or damaged between the lid and trim.
113 Wiring Devices | Master Catalogue 2017
Made with FlippingBook Annual report