Floor outlet boxes Technical description
Floor boxes
Description The Mita floor box range contains a complete portfolio of products for installation of British Standard outlets for power and data in raised floor applications. Plastic and stainless steel trimmed floor boxes are available, each including lid, carpet trims and a metal base box, ready for mounting either three or four outlets. The lid can be infilled with various floor materials. The plastic trim can accommodate an insert of up to 6 mm thickness, and ready-to-use lid infills of grey linoleum or stainless steel are available. The stainless steel trim can accommodate up to 15 mm thick insert materials, such as carpet, wood or stone tiles. All floor boxes feature a convenient quick-fix fixing system, enabling a tool-free and secure fit into the floor. The plastic floor boxes are also available in pre-wired versions. Benefits • Quick and easy installation, without tools • Large outlet capacity • Wide range of plates and accessories to satisfy end-user requirements • Three depths: 70, 100 and 130 mm • The 100 and 130 mm 3-compartment versions are prepared for integration of a circuit breaker • Lid recesses can be infilled with most common floor finishes • Reversible, self closing lid • Durable and scratch-resistant material • Pre-wired versions: fully assembled and factory tested to eliminate wiring errors and loss of components and reduced installation times • According to BS EN 60670-23:2008 standard Technical and Material data PA/ABS Density 1.12 g/cm 3 Linear expansion 70x10 –6 m/m°C Water absorption 0.9% Volume resistivity 10 14 Ω cm Dielectric strength 19 kV/mm Colour Grey RAL 7011 PA6 Density 1.13 g/cm 3 Linear expansion 70-100x10 –6 m/m °C Colour Blue RAL 5003 Sheet steel Specification S 350 GD Density 7.8 g/cm 3 Surface treatment Zinc coated Stainless steel Specification X5CrNi 18-10 Density 7.8 g/cm 3 Cable capacity 1720 mm 2 , max. cable Ø 11 mm Temperature range Operating temperature from -25ºC to +60ºC Degree of protection IP20 Standards The products comply with BS EN 60670-23:2008 The products satisfy the provisions for CE marking according to the Low Voltage Directive 73/23/EEC and 93/68/EEC
Dimensions
A mm
B mm
C mm
D mm
Plastic trimmed boxes INS53070 INS54070
75
30
30
6
INS53100 INS54100 INS53130 INS54130
105 45
45
6
135 60
60
6
Steel trimmed boxes INS53170 INS54170
84
30
30
15
INS53200 INS54200 INS53230 INS54230
114 45
45
15
144 60
60
15
Floor cut-out
117 Wiring Devices | Master Catalogue 2017
Made with FlippingBook Annual report