Electronic Dimmer Switches / Fan Control
Electronic Dimmer Switch Wiring Diagram 1. One gang one way wiring diagram
2. Two gang two way wiring diagram
Single quick press for light ON/OFF, press and hold to activate continuing ramping cycle. The switch incorporates a surge filter for instantaneous surge protection and built-in memory to restore previous light level.
Description
1G Dimmer
Voltage
200-250V a.c. 50/60Hz
Power Rating
40-600W
40-400W x 2 Channels
Load Type
Incandescent lamp only
Standby Current
≤13mA
Dimension
87 x 87 x 40mm
87 x 87 x 50mm
Mounting Wall Box
25mm deep or above
35mm deep or above
Operating Temperature
0 - 35 C
0
Compliance
BS5518
outlet - FCC standard Wiring Diagram
The Schneider Electric fan controller is a solid state unit, designed to provide smooth speed variations from full to slow on Most fans. Fan speed Can set to suit any conditions. Full speed for efficient exhaust of stale air or steam in kitchens and bathrooms. Otherwise, the controller should be adjusted to the low setting for constant, quiet circulation and change of fresh air. Any number of fans May connect in parallel up to a total loading of 400VA. Only similar types of fans should be connected in parallel to minimize the possibility of resultant variable speeds.
133 Wiring Devices | Master Catalogue 2017
Made with FlippingBook Annual report