HYDRAULIC PUMPS AND ACCESSORIES
Hydro Custom™ A10V Variable Displacement Pumps
All Products
Hydraulics
Technical Specifications: •
Swashplate axial piston pump Good suction characteristics Compact, lightweight, low noise
• • • •
Hydraulic Cylinders
Long service life, high precision bearings
Axial and radial load capacity Maximum Operating Pressure: • Nominal: 4060 psi (280 bar) • Intermittent: 4560 psi (315 bar) • Peak: 5075 psi (350 bar) •
Hydraulic Cylinder Components
Maximum case drain pressure: 29 psi (2 bar)
Motors and Accessories
• Succion pressure range: 11.6 - 435 Psi (0.8 - 30 Bar) absolute Features: • Pressure compensator with load sense control (dfr) • Volume stop • Clockwise rotation • Side ports with code 61 flanges • Buna seals Also Available: • Many controls such as: remote compensator (drg) and compensator with horsepower limiter (dflr) • Counterclockwise rotation • End ports with code 61 or 62 flanges • Viton seals • Other mounting flanges and shafts
Hydraulic Power Units
Hydraulic Pumps and Accessories
Hydraulic Valves and Accessories
Displacement in³ (cm³) / Rev.
GPM @ 1800 RPM
Max RPM
Mounting Flange
Ports Code Flange 61
Drain Port
Model Code
Shaft
Accumulators and Accessories
A10VS018-DFR-31-R-P-K-C62N00 1.1 (18)
8.5 3300 SAE-A 2 Bolt
3/4” Key Inlet: 1” Outlet: 3/4” SAE-06
A10VS018-DFR-31-R-P-S-C62N00 1.1 (18)
8.5 3300 SAE-A 2 Bolt 3/4 Spline Inlet: 1” Outlet: 3/4” SAE-06
A10VS028-DFR-31-R-P-K-C62N00 1.71 (28)
13 3000 SAE-B 2 Bolt
7/8” Key Inlet: 1 1/4” Outlet: 1” SAE-08
Gauges and Meters
A10VS028-DFR-31-R-P-S-C62N00 1.71 (28)
13 3000 SAE-B 2 Bolt 7/8” Spline Inlet: 1 1/4” Outlet: 1” SAE-08
A10VS045-DFR-31-R-P-K-C62N00 2.75 (45)
21 2600 SAE-B 2 Bolt
1” Key
Inlet: 1 1/2” Outlet: 1” SAE-10
A10VS045-DFR-31-R-P-S-C62N00 2.75 (45)
21 2600 SAE-B 2 Bolt
1” Spline Inlet: 1 1/2” Outlet: 1” SAE-10
Reservoir Tanks and Accessories
A10VS071-DFR-31-R-P-K-C62N00 4.33 (71)
33.5 2200 SAE-C 2 Bolt 1 1/4” Key
Inlet: 2” Outlet: 1”
SAE-10
A10VS071-DFR-31-R-P-S-C62N00 4.33 (71)
33.5 2200 SAE-C 2 Bolt 1 1/4” Spline Inlet: 2” Outlet: 1”
SAE-10
A10VS0100-DFR-31-R-P-K-C62N00 6.10 (100)
47 2000 SAE-C 2 Bolt 1 1/2” Key
Inlet: 2 1/2”
SAE-12
Filters and Accessories
A10VS0100-DFR-31-R-P-S-C62N00 6.10 (100)
47 2000 SAE-C 2 Bolt 1 1/2” Spline Outlet: 1 1/4”
SAE-12
A10VS0140-DFR-31-R-P-K-C62N00 8.54 (140)
66.5 1800 SAE-D 4 Bolt 1 3/4” Key
Inlet: 2 1/2”
SAE-12
Heat Exchangers
A10VS0140-DFR-31-R-P-S-C62N00 8.54 (140)
66.5 1800 SAE-D 4 Bolt 1 3/4” Spline
Outlet: 1 1/4”
SAE-12
HANSA-TMP™ TPV 1300 Tandem Pumps
Hoses and Fittings
•
Basically same TPV 1100 specifications
• Very compact (back to back pumps configuration) • Configured to customer specifications. Contact the Bailey sales team for ordering information.
Electronics
Mobile Components
baileyintl.com
Tel: 855-724-7709
119
Made with FlippingBook flipbook maker