HYDRAULIC VALVES AND ACCESSORIES
Chief™ P70 - Tandem Metering
All Products
Hydraulics
Brand Valve Replacements
•
Flow range from 0-18 GPM - 3000 PSI
Hydraulic Cylinders
• Pressure compensation along with fine metering allows precise control over the speed of the actuator, regardless of the load • 1 spool - Precision ground chromium plated spool assures long life • Full range pressure compensated by-pass type flow control valve built in • Adjustable pilot operated relief • Fine metering in either direction
Hydraulic Cylinder Components
Spool
Port Size
Part No.
No. of Spools
Ship Wt.
GPM
Motors and Accessories
Type
Action
In/Out Work 3/4 NPT 1/2 NPT 3/4 NPT 1/2 NPT
220790 220791 220792 220789
0-6
1 1 1 1
4-Way 3 Pos. Fine Metering 4-Way 3 Pos. Tandem Metering 4-Way 3 Pos. Tandem Metering 4-Way 3 Pos. Tandem Metering
Spring Center To Neutral Spring Center To Neutral Spring Center To Neutral
7 6
0-12 0-12 0-18
SAE 12 SAE 10 6
Hydraulic Power Units
Friction Detent
3/4 NPT 1/2 NPT
6
Chief™ G Series with Micro-Switch
Hydraulic Pumps and Accessories
Directional Control Valve with Micro-Switch - 10 GPM
• • •
10 GPM - 3625 PSI Cast iron construction Relief setting at 1500 PSI
Hydraulic Valves and Accessories
• Good for systems that operate with a battery • Micro-switch affixed to end that allows valve to trigger micro-switch when it is shifted from neutral and release when shifted back to neutral • Load check
Accumulators and Accessories
Spool
Port Size
Part No.
No. Of Spools
Ship Wt.
GPM
Type
Action
In/Out Work
Gauges and Meters
220899
10
1 4-Way 3 Pos. Tandem Center Spring Center to Neutral with Microswitch SAE 10 SAE 8 7
Reservoir Tanks and Accessories
Hydro Custom™ BM3 Series with Micro-Switch
• Normally open (NO) microswitch triggered to closed • When valve is shifted from the neutral position • Microswitch has a female connector with a male end • Direct acting relief set at 2,175 PSI (150 bar), adjustable from 900 to 2900 PSI • Cast iron construction, built in load check on spool • Relief cartridges available for 580-1150 PSI or 2300-4600 PSI Directional Control Valve with Micro-Switch - 12 GPM
Filters and Accessories
Heat Exchangers
Hoses and Fittings
Part No.
Max PSI
No. Of Spools
Port Size
GPM
Type
Action
Voltage
Ship Wt.
Spring Center to Neutral with Normally Open Microswitch
12VDC at 10A or 24VDC at 3A
12
4600
1
4-Way, 3 Pos.
SAE 8
6
228958
Electronics
Mobile Components
136 Tel: 855-724-7709 baileyintl.com
Made with FlippingBook flipbook maker