HOSES AND FITTINGS
Two-Wire Braided Hydraulic Hose
All Products
Hydraulics
Sold by the Foot. Excedes SAE 100R2 AT.
• Recommended for: High-pressure hydraulics with low flexure/non-severe applications requiring the SAE 100R2 or EN853 2SN specification for dimensions and performance • Tube: Black, oil-resistant, synthetic rubber (Nitrile-Type C) • Reinforcement: Two braid of high-tensile steel wire • Cover: Black, abrasion-resistant, synthetic rubber (Modified SBR) • Temperature Range: -40 ºF to +212 ºF (-40 ºC to +100 ºC) • MSHA Certified Note: Must advise if continued length is needed
Hydraulic Cylinders
Hydraulic Cylinder Components
Motors and Accessories
Bend Radius
Part No.
MFG No.
I.D.
O.D.
Work PSI Burst PSI
DIN2SN-04 1/4 DIN2SN-06 3/8 DIN2SN-08 1/2 DIN2SN-12 3/4 DIN2SN-16 1
0.591 0.748 0.874 1.154 1.500
5800 4785 3990 3120 2395
23200 19140 15960 12480
4” 5” 7”
485062 485063 485064 485065 485066
Hydraulic Power Units
9.5”
9580
11.8”
Standard Reel Sizes: 485062 - 550 ft / 485063 - 400 ft / 485064 - 330 ft / 485065 - 220 ft / 485066 - 165 ft
Hydraulic Pumps and Accessories
Suction Hose
Sold by the Foot. SAE 100R. •
Hydraulic Valves and Accessories
Recommended for: Petroleum and water-base hydraulic fluids in suction lines or in low-pressure return lines. Meets or exceeds requirements of SAE 100R4. Uses half the bend radius of SAE 100R4 • Reinforcement: Double spiral textile (braid for -12, -16, and -20) reinforced with a helical spiral wire to prevent collapse • Cover: Black, abrasion-resistant, synthetic rubber (Modified SBR) • Temperature Range: -40 ºF to +275 ºF (-40 ºC to +135 ºC) • MSHA Certified Note: Must advise if continued length is needed
Accumulators and Accessories
Gauges and Meters
Bend Radius
Part No.
MFG No.
I.D.
O.D.
Work PSI Burst PSI
Reservoir Tanks and Accessories
SAER4-12 3/4
1.26
300
1200
2.5”
485068
Filters and Accessories
Lenz™ In-Line Air Bleeder Valve
It’s important to bleed the air from all hydraulic lines and equipment to maintain proper hydraulic operating efficiency. This valve is perfect for eliminating the air from your hydraulic lines. With the valve installed at the highest point in the circuit, where the air accumulates, opening the valve allows the air to escape. Once the air is bleed, the valve should be closed.
Heat Exchangers
Hoses and Fittings
Part No.
MFG No.
Size
Max PSI
Material
Length
Closed: 1.8”, Open: 2.05”
6ABV
3/8” NPT
3000
Steel, Zinc Plated
118460
Electronics
Mobile Components
252
Tel: 855-724-7709 baileyintl.com
Made with FlippingBook flipbook maker