HYDRAULIC CYLINDERS
Chief™ WT Welded Cylinders - 3000 PSI
All Products
Hydraulics
Our Strongest Welded Cylinder!
Featuring welded cross-tube mounts on the rod and base ends. Heavy-duty piston with piston stem, complete with wear rings to reduce friction. The screw-in gland is removable from the rod end for seal servicing convenience. Now with SAE porting on 5”, 6”, and 8” bore sizes.
Hydraulic Cylinders
• •
Intended use: Double-acting applications Piston: Ductile iron with wear rings
Hydraulic Cylinder Components
• Gland: Ductile iron, screw-in design (externally threaded collar) • Tube: Precision honed steel • Rod: Ground and polished chromed steel, minimum 75,000 PSI yield • Base plate: Steel • End mounts: Steel cross tubes with grease zerk • Spacer tube: Steel on 48” stroke and above • Gland seal: Polyurethane-loaded u-cup rod seal • Wiper: Polyurethane, single-lipped, snap-in wiper • Piston seal: Double-acting, polyester face seal with rubber energizer • 3-year warranty
Motors and Accessories
Hydraulic Power Units
Dimensional Data in Inches:
Hydraulic Pumps and Accessories
Bore A*
B
D E
G J**
K M N R***
S
T
U
2.0 7 0.188 1.25 2.62 1.75 1.880 2.440 0.970 0.63 0.765 1.25 NA 1.000 2.5 8 0.188 1.50 3.12 2.00 2.000 3.120 1.040 0.63 0.765 1.25 NA 1.000 3.0 8 0.188 1.75 3.50 2.25 2.190 1.910 1.250 0.75 1.015 1.50 NA 1.750 3.5 8 0.188 2.00 4.00 2.50 2.310 1.600 1.310 0.75 1.015 1.50 NA 1.750 4.0 9 0.250 2.25 4.625 4.00 2.185 2.073 1.610 1.00 1.265 2.00 NA 1.875 5.0 11 0.313 2.50 5.75 4.00 3.000 2.750 1.500 1.25 1.515 2.50 6.00 1.626 6.0 11 0.300 3.00 6.75 4.00 3.000 2.250 1.500 1.32 1.515 2.50 7.25 2.250 8.0 16 0.375 4.00 9.00 5.00 3.313 3.500 3.187 2.00 2.515 4.00 9.91 4.000 * For dimension A: a 2.00” (50.8mm) spacer is added at 48.00 (1219.2mm) stroke, and an additional 1.00” (25.4mm) is added for each additional 6.00” (152.4mm) of stroke thereafter to a 6.00” (152.4mm) maximum spacer.
Hydraulic Valves and Accessories
Accumulators and Accessories
** For dimension J: a 2.0” bore with 1.0” pins, “J” = 2.32”; for 2.5” bore with 1.0” pins, “J” = 3.00”. *** For dimension R: a 2.0” and 2.5” bore cylinders, R = 1.015” and S = 1.500”. (25.8mm). Note: 5”, 6”, and 8” bores have an externally mounted retainer ring.
Column Load
Gauges and Meters
Part No.
Stroke
Rod Dia.
Retracted Extended
Port Size Pin Dia.
Ship Wt.
2” Bore - 0.75” Pin
212700 212701 212702 212703 212704 212705 212706 212707 212708 212709 212710 212711 212712 216800 212674 212675 212676 212677 212678 212679 212680 212681 212682 212683 212684 212685 212686 216800
4 6 8
1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25
11 13 15 17 19 21 23 25 27 31 37 39 43 11 13 15 17 19 21 23 25 27 31 37 39 43 -
15 19 23 27 31 35 39 43 47 55 67 71 79 15 19 23 27 31 35 39 43 47 55 67 71 79 -
9,420 9,420 9,420 9,420 9,420 9,420 9,420 9,420 9,420 8,800 5,933 5,190 4,260 9,420 9,420 9,420 9,420 9,420 9,420 9,420 9,420 9,420 8,800 5,933 5,190 4,260 -
SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 SAE 8 -
0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75
9
11 12 14 15 17 19 20 21 24 29 31 33 11 12 14 15 17 19 20 21 24 29 31 33 - 9
Reservoir Tanks and Accessories
10 12 14 16 18 20 24 30 32 36
Filters and Accessories
Heat Exchangers
-
Seal Kit
2” Bore - 1” Pin
4 6 8
1 1 1 1 1 1 1 1 1 1 1 1 1 -
Hoses and Fittings
10 12 14 16 18 20 24 30 32 36
Electronics
Mobile Components
-
-
-
-
-
Seal Kit
28 Tel: 855-724-7709 baileyintl.com
Made with FlippingBook flipbook maker