HYDRAULIC CYLINDER COMPONENTS
Steel Clevis Pins
All Products
Hydraulics
All items come with R-style pin hole or can use an A-style clip
C1045 Steel Clevis Pins
Hydraulic Cylinders
Part No. *172250 *172200 172251
O.D .
Useable Length Overall Length Clip Style
1.00 1.00 1.25
2.875 3.250 2.850
3.5 OAL 4.125 OAL 3.500 OAL
R-Style A-Style R-Style
Hydraulic Cylinder Components
*Includes clips
Breather Vents
Motors and Accessories
Enhanced Brass Breather Vent
Part No. 237259
Micron
Thread Size
Hydraulic Power Units
10-12 SAE 8 Enhanced design with solid top. More resisteant to moisture and dirt. Often used on single acting cylinders or valves, gear boxes, crank cases, storage tanks or other similar applications.
Nickel-Plated Iron Breather Vents
Hydraulic Pumps and Accessories
Part No. 237261 237262 237263 237264 237265
Micron
Thread Size
40 40 40 40 40
1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT
Hydraulic Valves and Accessories
Brass Breather Vents
Part No. 237250 237251 237252 237253 237254 237266 237256 237257 237258
Micron
Thread Size
Accumulators and Accessories
40 40 40 40 40 40 40 40 40
1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT SAE 4 SAE 6 SAE 8 SAE 12
Gauges and Meters
Often used on single acting cylinders or valves to prevent dirt and foreign particles from entering ports open to the atmosphere. Also used for vacuum pressure equalization for gear boxes, crank cases, storage tanks or other similar applications. Stroke Controls
Reservoir Tanks and Accessories
Filters and Accessories
Stroke Adjuster - Externally Mounted
Part No.
Female Thread
Male Thread
Heat Exchangers
277321
1 1/4”
2 1/4”
Fits threaded rods with 1.25” male threads. Thread the Adjuster onto the rod to decrease the stroke. Adjustment range is approximately 1”.
Stroke Adjuster
Stroke Controls - Externally Mounted
Hoses and Fittings
237072 237071 237068 237073 Part No.
3/4” to 1” Fits Rod
Includes Segment Sizes
0.75”, 1”, 1.25”, 1.5” 3/4”, 1”, 1 1/4”, 1 1/2” 1”, 1 1/2”, 2”, 4 1/4”
1 1/8”, 1 1/4”, 1 3/8”, 1 1/2”
Electronics
1 3/4”, 1 7/8” 1 3/4” to 2”
1”, 1.5”, 2”, 4”
Clamps to the exterior of the rod to reduce the amount of retraction by the depth of the stroke control segment size used. Each part # comes with 4 segments of different sizes. (This also increases your fully retracted length – center of pin hole to center of pin hole).
Mobile Components
Stroke Controls
56 Tel: 855-724-7709 baileyintl.com
Made with FlippingBook flipbook maker