MOTORS AND ACCESSORIES
Low Speed High-torque Motors - BME Series
All Products
Hydraulics
• The performance values listed below are for continuous use conditions. • The optimal operating condition is 1/3 to 2/3 of the continuous use values. • Most BME models have a counterclockwise rotation (facing the shaft) when port A is pressurized. • Standard shaft seals for the BME series are rated to 2,900 PSI. • Case drains, manifold threads, and radial bearings are not available on this series. • Due to the design, this series does not have internal check valves. Must use case drain. Performance: The BME series motor features an advanced geroler gear set design, making it suitable for high-pressure, high-efficiency, low-speed applications. The needle bearing design allows this motor to withstand higher axial and radial forces. The advanced high-speed distribution flow design automatically compensates during operation, ensuring high- volume efficiency and smooth operation at low speeds.
BMEW Wheel Mount
Hydraulic Cylinders
Hydraulic Cylinder Components
BME 6 Holes Magneto
Motors and Accessories
Specifications:
Hydraulic Power Units
• • • •
Mounting Flange: Magneto, SAE-A 6-Bolt Radial Shaft Load: 3527 lbs. (1600 kg) Axial Shaft Load: 881 lbs. (400 kg) Ratings: 2900 PSI HPSS; 20 GPM
Hydraulic Pumps and Accessories
• Rotation: Bi-rotational, counterclockwise most common preferred • Temperature Rating: 100-120°F working, 176°F (80°C) max • Port Configuration: Parallel • Port Size: SAE 10
Hydraulic Valves and Accessories
BME - Magneto Mount Model Code CID (CC)
Torque (lb-in)
Max GPM
Max PSI
Port Size
GPM @ RPM
Mounting Flange
Note Shaft Seal
Accumulators and Accessories
392-2021F 392-2022F 15 GPM @ 301 RPM 2162 15 2100 1 1/4" Spline, 14-Tooth SAE 10 CCW 2900 PSI 12.2 (200) 18 GPM @ 290 RPM 2691 18 2100 1 1/4" Spline, 14-Tooth SAE 10 CCW 2900 PSI 392-0024F 18.3 (300) 21 GPM @ 225 RPM 4037 21 2100 1 1/4” Straight, P. Key SAE 10 CCW 2900 PSI 392-3044F 18.3 (300) 21 GPM @ 225 RPM 4037 21 2100 1 1/4" Taper, 1:8, P. Key SAE 10 CCW 2900 PSI 392-2027F 29 (475) 19 GPM @ 129 RPM 6184 19 2030 1 1/4" Spline, 14-Tooth SAE 10 CCW 2900 PSI 392-0029 45.5 (750) 19 GPM @ 82 RPM 7169 19 1500 1 1/4” Straight, P. Key SAE 10 CW 2900 PSI 9.8 (160)
Gauges and Meters
BMEW - Wheel Mount
Model Code
CID (CC)
Torque (lb-in)
Max GPM
Max PSI
Port Size
GPM @ RPM
Mounting Flange
Note Shaft Seal
Reservoir Tanks and Accessories
7.6 (125) 9.8 (160) 14 (200) 14 (230)
11 GPM @ 284 RPM 1676 11 2100 1 1/4” Taper, 1:8, P. Key SAE 10 CCW 2900 PSI 15 GPM @ 301 RPM 2162 15 2100 1 1/4” Taper, 1:8, P. Key SAE 10 CCW 2900 PSI 18 GPM @ 252 RPM 3088 18 2100 1 1/4” Taper, 1:8, P. Key SAE 10 CCW 2900 PSI 18 GPM @ 252 RPM 3088 18 2100 1 1/4” Taper, 1:8, P. Key SAE 10 CCW 2900 PSI
392-3000F 392-3001F 392-3002F 392-300AF
Filters and Accessories
392-3003F 15.3 (250) 19 GPM @ 244 RPM 3375 19 2100 1 1/4” Taper, 1:8, P. Key SAE 10 CCW 2900 PSI 392-3004F 18.3 (300) 19 GPM @ 204 RPM 4037 19 2100 1 1/4” Taper, 1:8, P. Key SAE 10 CCW 2900 PSI 392-3014F 18.3 (300) 19 GPM @ 204 RPM 4037 19 2100 1 1/4" Taper, 1:8, W. Key SAE 10 CCW 2900 PSI 392-3007F 29 (475) 19 GPM @ 129 RPM 6397 19 2100 1 1/4” Taper, 1:8, P. Key SAE 10 CCW 2900 PSI 392-3017F 29 (475) 19 GPM @ 129 RPM 6397 19 2100 1 1/4" Taper, 1:8, W. Key SAE 10 CCW 2900 PSI 392-3008F 33 (540) 19 GPM @ 113 RPM 7037 19 2030 1 1/4” Taper, 1:8, P. Key SAE 10 CCW 2900 PSI 392-3009F 45.5 (750) 19 GPM @ 82 RPM 7169 19 1500 1 1/4” Taper, 1:8, P. Key SAE 10 CCW 2900 PSI
Heat Exchangers
BMER - Wheel Mount
Hoses and Fittings
Model Code
CID (CC)
Torque (lb-in)
Max GPM
Max PSI
Port Size
GPM @ RPM
Output Shaft
Note Shaft Seal
15.3 (250) 19 GPM @ 244 RPM 3488 19 2170 1 1/4” Taper, 1:8, P. Key SAE 10 CCW 2900 PSI
393-3023F
Electronics
Note that some of these items have reverse timing, counterclockwise preferred rotation (CCW).
Mobile Components
64 Tel: 855-724-7709 baileyintl.com
Made with FlippingBook flipbook maker