MOTORS AND ACCESSORIES
The BM6 series is a large-volume disc valve motor featuring a radial ball-bearing design that can tolerate higher loads. This motor is ideal for high-pressure applications, providing greater maximum torque than our BM5 series. Its advanced disc flow distribution improves performance at low speeds. The valve can automatically adjust for wear, increasing volumetric efficiency. Double-taper roller bearings allow the motor to handle high radial loads. These motors are ideal for heavier vehicles in traction drive applications. Low Speed High-Torque Motors - BM6 Series Performance:
All Products
Hydraulics
Hydraulic Cylinders
Hydraulic Cylinder Components
• The performance values listed below are for continuous use conditions. See the drawing for performance curves, including peak and intermittent values. • The optimal operating condition is 1/3 to 2/3 of the continuous use values. • Standard rotation is clockwise (facing the shaft) when port A is pressurized. • Standard shaft seals for the BM6 series are rated to 1,085 PSI. HPSS to 2900 PSI. • Case drains relieve internal oil leakage and prevent housing overpressure, protecting seals and extending motor life. • Standard shaft seals and bearings are not recommended for applications that may experience side-loadings. • Internal check valves are included for smoother directional control.
Motors and Accessories
Hydraulic Power Units
Specifications:
Shaft Seal Curve Chart
• • •
Mounting Flange: Square, SAE-C 4-Bolt Radial Shaft Load: 4,629 lbs. (2,100 kg) Axial Shaft Load: 1763 lbs. (800 kg)
Hydraulic Pumps and Accessories
• Ratings: 1,085 PSI standard, 2900 PSI HPSS; 35-40 GPM Max • Rotation: Bi-rotational, clockwise preferred • Temperature Rating: 100-120°F working, 176°F (80°C) max • Port Configuration: Staggered • Port Size: SAE 16 • Case Drain: SAE 4 • Drain on the back cover
Hydraulic Valves and Accessories
Accumulators and Accessories
Model Code
Torque (lb-in)
Max GPM
Max PSI
Mounting Flange
CID (CC) 11.9 (195) 14.9 (245) 14.9 (245) 24 (395) 24 (395) 29.9 (490) 29.9 (490) 38.1 (625) 38.1 (625) 48.8 (800)
GPM @ RPM
Shaft
Shaft Seal
40 GPM @ 660 RPM 1356 40 1085 SAE-C 4-Bolt 40 GPM @ 527 RPM 1698 40 1085 SAE-C 4-Bolt 40 GPM @ 527 RPM 1698 40 1085 SAE-C 4-Bolt 40 GPM @ 327 RPM 2735 40 1085 SAE-C 4-Bolt 40 GPM @ 327 RPM 2735 40 1085 SAE-C 4-Bolt 40 GPM @ 263 RPM 3408 40 1085 SAE-C 4-Bolt 40 GPM @ 263 RPM 3408 40 1085 SAE-C 4-Bolt 40 GPM @ 206 RPM 4342 40 1085 SAE-C 4-Bolt 40 GPM @ 206 RPM 4342 40 1085 SAE-C 4-Bolt 40 GPM @ 161 RPM 5562 40 1085 SAE-C 4-Bolt
1 1/2” X 57mm, P. Key 1085 PSI
361-0181 361-2012 361-0182 361-0184 361-0574 361-0185 361-0575 361-0186 361-0576 361-0188
1 1/2” Spline, 17-T
1085 PSI
Gauges and Meters
1 1/2” X 57mm, P. Key 1085 PSI 1 1/2” X 57mm, P. Key 1085 PSI
1 1/2” P. Key
1085 PSI
1 1/2” X 57mm, P. Key 1085 PSI
1 1/2” P. Key
1085 PSI
Reservoir Tanks and Accessories
1 1/2” X 57mm, P. Key 1085 PSI
1 1/2” P. Key
1085 PSI
1 1/2” X 57mm, P. Key 1085 PSI
Other configurations are available. Call us to find out more.
Filters and Accessories
Dimensions
Heat Exchangers
Hoses and Fittings
Electronics
Mobile Components
68 Tel: 855-724-7709 baileyintl.com
Made with FlippingBook flipbook maker