MOTORS AND ACCESSORIES
The BMV series is a large-volume disc valve motor with a radial ball-bearing design that can handle higher loads. This motor has a larger housing than the BMT series and is ideal for high-pressure, high-torque applications. Its advanced disc flow distribution enhances performance at low speeds. The valve can automatically adjust for wear, increasing volumetric efficiency. Double-taper roller bearings enable the motor to withstand high radial loads. These motors are suitable for traction drive applications. Low Speed High-Torque Motors - BMV Series Performance:
All Products
Hydraulics
Hydraulic Cylinders
Hydraulic Cylinder Components
• The performance values listed below are for continuous use conditions. See the drawing for performance curves, including peak and intermittent values. • The optimal operating condition is 1/3 to 2/3 of the continuous use values. • Standard rotation is clockwise (facing the shaft) when port A is pressurized. • Standard shaft seals for the BMV series are rated to 1,085 PSI. HPSS to 2900 PSI. • Case drains relieve internal oil leakage and prevent housing overpressure, protecting seals and extending motor life. • Standard shaft seals and single bearings are not recommended for applications that may experience side-loadings. • Internal check valves are included for smoother directional control.
Motors and Accessories
Hydraulic Power Units
Specifications:
Shaft Seal Curve Chart
• • • •
Output Shaft: 2-1/4” Straight, Parallel Key Mounting Flange: Square, SAE-C 4-Bolt Radial Shaft Load: 5,952 lbs. (2,700 kg) Axial Shaft Load: 2,204 lbs. (1,000 kg)
Hydraulic Pumps and Accessories
• Ratings: 1,085 PSI standard, 2900 PSI HPSS; 40-53 GPM Max • Rotation: Bi-rotational, clockwise preferred • Temperature Rating: 100-120°F working, 176°F (80°C) max • Port Configuration: Staggered • Port Size: SAE 16 • Case Drain: SAE 6
Hydraulic Valves and Accessories
Accumulators and Accessories
Model Code
Torque (lb-in)
Max GPM
Max PSI
Mounting Flange
CID (CC) 24.4 (400) 30.5 (500) 38.4 (630) 48.8 (800) 61 (800)
GPM @ RPM
Shaft
Shaft Seal
53 GPM @ 426 RPM 2781 53 1085 SAE-C 4-Bolt 53 GPM @ 341 RPM 3476 53 1085 SAE-C 4-Bolt 53 GPM @ 271 RPM 4376 53 1085 SAE-C 4-Bolt 53 GPM @ 213 RPM 5562 53 1085 SAE-C 4-Bolt 53 GPM @ 171 RPM 6952 53 1085 SAE-C 4-Bolt
2 1/2” P. Key 2 1/2” P. Key 2 1/2” P. Key 2 1/2” P. Key 2 1/2” P. Key
1085 PSI 1085 PSI 1085 PSI 1085 PSI 1085 PSI
381-0022 381-0023 381-0024 381-0025 381-0026
Gauges and Meters
Other configurations are available. Call us to find out more.
Reservoir Tanks and Accessories
Dimensions
Filters and Accessories
Heat Exchangers
Hoses and Fittings
Electronics
Mobile Components
70 Tel: 855-724-7709 baileyintl.com
Made with FlippingBook flipbook maker