Multi-Compartment & Gasketed Trunking
Multi-Compartment Trunking & Fly-Overs
• Partitions manufactured from galvanised steel spot welded into position • Partitions can also be supplied for loose on-site fixing • Trunking with unequal spaced compartments can be supplied - Please state sizes required at time of ordering • All accessories shown on the single compartment page can be manufactured to suit multi-compartment • All compartments are equally spaced unless requested • Compartments are equally spaced as standard • Speak to our technical team for unequal compartments
Fly-Overs
•
Fly-Overs are supplied with all tees and crossovers Approximately 50% of cable capacity is lost when fitting a Fly-Over
•
Gasketed Trunking for External Use (IP54)
All the sizes shown in single and multi-compartment sections can be manufactured to prevent ingress of dust and liquids (IP54). This innovative system is designed with an outward returned flange on the body with an overlapping lid, which is fitted with EDPM both sides along its entire length. When installed, the gasket is compressed between body and lid by mushroom screws which fix into captive bushes on the outward flanges. Trunking manufactured to this design will provide IP54 protection and is supplied in 2 metres lengths maximum. Atkore Unistrut also offer a complete range of fully gasketed accessories.
Allied Tube & Conduit
143
Made with FlippingBook Digital Publishing Software