Atkore Unistrut & Marco Digital Catalogue

Flush Floor Shallow Screeds

Flush Floor Shallow Screeds

Flush Floor Trunking body is supplied in 2 metre lengths complete with 2 x 1 metre lengths of lid secured by means of flush all steel turnbuckle fasteners. Each length of Flytec trunking is supplied with one external fitting connector. Lids are manufactured from 3mm thick Galvanised steel. They are fully removable and may be flush or recessed by 3mm as standard. Other depths of recess can also be supplied. It is advisable that all lid sections are fitted during screeding. This will prevent any slight inward movement to the sides of trunking body. Atkore Unistrut recommend that Flush Floor Trunking is installed on a ribbon screed or similar to ensure support along the entire length and width of the system.

D1 - Flush Screeds

D2 - Recessed Screed

150mm x 38mm

D1/615/2C

150mm x 38mm

D2/615/2C

150mm x 50mm

150mm x 50mm

D1/62/2C

D2/62/2C

228mm x 38mm

228mm x 38mm

D1/915/3C

D2/915/3C

228mm x 50mm

228mm x 50mm

D1/92/2C

D2/92/2C

How to order Flush Floor Trunking guide:

• To order Flush Floor Trunking, simply select the trunking ( D1 or D2 ), the size (see table below), and the compartment 2C or 3C

Flush Floor Size Guide 61 (6X1) 61 5 (6X1.5) 62 (6X2) 91 (9X1) 91 5 (9X1.5) 92 (9X2) 121 (12X1) 121 5 (12X1.5) 122 (12X2)

For example:

D1 trunking, size 6x1 with 2 Compartments

• Take trunking reference D1 + size 61 + 2 compartment 2C to give D1/61/2C

Allied Tube & Conduit

158

Made with FlippingBook Digital Publishing Software