D6 Flush Floor Trunking Service Outlet Systems
D6 Flush Floor Trunking
Flytec’s flush floor trunking is supplied in 2 metre lengths, including 400mm lengths of removable lid which are interchangeable with a service outlet box, thus giving the designer flexibility of positioning within a screeded floor installation. Flytec lids that are manufactured from 3mm thick Galvanised Steel are fixed to the trunking body by countersunk zinc plated steel turnbuckle fastners, providing speed of fitting by the installer and maximum rigidity of the finished product. Key Features • Available in two or three compartments • It is advisable that all lid sections are fitted during screeding. This will prevent any slight inward movement to the sides of trunking body The Flush Floor Trunking is installed on a ribbon screed or similar to ensure support along the entire length and width of the system.
How to order D6 Flush Floor Trunking & Accessories guide:
• To order D6 Flush Floor Trunking, select the trunking and the compartment (see table below) • For accessories, simply add the accessory part number to the end of the code
For example:
D6 Flush Floor Guide 15 2 Compartment 16 3 Compartment
•
D6 2 Compartment Trunking
• Take trunking reference D6/C + 2 compartment 15 to give D6/C/15 • D6 Riser Bend 2 Compartment Trunking • Take trunking reference D6/C + 2 compartment 15 + ISB to give D6/C/15/ISB
Allied Tube & Conduit
162
Made with FlippingBook Digital Publishing Software