Elite Compact - Accessories
3 Compartment Trunking
Flat Angle
Flat Tee
Product Information Code MEC3T Dimensions (mm) 293 x 222.5 x 52 Pack Qty 1
Product Information Code MEC3F Dimensions (mm) 224 x 224 x 52 Pack Qty 1
Available Colours
Available Colours
Two-piece moulded flat angle for Elite Compact with built in data guides retaining CAT6, CAT6A and CAT7 compliance. Flat overlaps trunking lids, with no needs for joint covers.
Moulded flat tee for Elite Compact with two sets of data guides to maintain 50mm bend radius for CAT6, CAT6A and CAT7 compliance. Tee overlaps trunking lids, with no need for joint covers.
Internal Angle
External Angle
Product Information Code MEC3I Dimensions (mm) 125 x 125 x 149.5* Pack Qty 1
Product Information Code MEC3E Dimensions (mm) 92 x 92 x 150* Pack Qty 1
Available Colours
Available Colours
Moulded internal angle with an adjustable design allowing for a variance of +/- 5 o accommodating walls without true 90 o bend. Angles have 50mm bend radius to comply with CAT6 and CAT7. * Indicates Height and Width before movement
Moulded external angle with an adjustable design, allowing for a variance of +/- 5 o accommodating walls without a true 90 o bend. Angles have 50mm bend radius to comply with CAT6 and CAT.
* Indicates Height and Width before movement
Internal Angle - Fixed 45°
External Angle - Fixed 45°
Product Information Code
Product Information Code
MEC3E-135
MEC3I-135
Pack Qty
1
Pack Qty
1
Available Colours
Available Colours
Pre Fabricated fixed internal angle for Elite Compact, designed for use on walls with a 45 o in-facing bend. Supplied as individual units and requires 2 joint covers. Additional joint covers (MEC3J x 2) required when fitting.
Pre Fabricated fixed external angle for Elite Compact, designed for use on walls with a 45 o out-facing bend. Supplied as individual units and requires 2 joint covers. Additional joint covers (MEC3J x 2) required when fitting.
Allied Tube & Conduit
218
Made with FlippingBook Digital Publishing Software