Concrete Inserts
Concrete Inserts Atkore Unistrut concrete inserts are manufactured from standard Unistrut channel and may be installed in floors, walls, or ceilings for the support of all types of piping, conduit, cable support, and other industrial equipment. Channel nuts can be positioned anywhere along the length of the channel, providing a means of attaching fittings or rods where required. Atkore Unistrut inserts are available pre-filled with an easily removable foam to prevent the ingress of grout and cement. Concrete inserts can be supplied in Pre Galvanised, Hot-Dip Galvanised and Stainless Steel finishes.
L= 6 m
L= 6 m
41 21
100 mm
41 21
100 mm
2,5
100 mm
2,5
100 mm
79
59
A
A
41
21
P3270
P3370
HG PG SS
HG PG SS
P3270 inserts are designed to accommodate M6, M8, M10, M12 & M16 fixings. Cutting positions are located between lugs as indicated (A) in increments of 200mm. The recommended loading in average strength concrete* with a safety factor of 3, is:
P3370 inserts are designed to accommodate M6, M8, M10 & M12 fixings. Cutting positions are located between lugs as indicated (A) in increments of 200mm The recommended loading in average strength concrete* with a safety factor of 3, is:
Part No.
Pullout
Length 300mm
Part No.
Pullout
Length 300mm
P3270
8.8kN
P3370
6.7kN
*B = 25 N/mm 2
*B = 25 N/mm 2
Allied Tube & Conduit
Stated loadings apply to mild steel products only.
23
Made with FlippingBook Digital Publishing Software