Product Overview
Steel Wire Cable Tray Systems
30mm, 55mm & 106mm
Atkore Marco’s Steel Wire Cable Tray is made from direct-drawn bright mild steel, and uses a 100 x 50mm mesh grid.
Each tray is produced in 3 metre lengths and supplied in pack quantities.
The range is complemented by a wide variety of fittings and accessories, all designed to make modifying and installing the tray on site as easy as possible.
Finishes
EZ
HDG
Electro Zinc BS EN ISO 2081:2008
Hot-Dip Galvanised
ISO 1461:2009
Recommended for use in interior installations where the atmosphere is non-corrosive. EZ Steel Wire Cable Tray is coated with a thickness of between 5-12 microns.
Recommended for exterior use and in more aggressive atmospheres. HG tray is coated to a minimum thickness of 55 microns. Hot-Dip Galv tray is special item and manufactured to order.
PG
PC
Pre-Galvanised
Powder Coated
BS EN 10244-2
BS EN 13438
Recommended for use in data centres and other interior applications. Marco PG Steel Wire Cable Tray is coated with a thickness of approximately 20 microns (135 gr/m2 - class B). Pre-Galvanised tray is special item and manufactured to order.
Powder-Coated is recommended for exterior and interior use in a range of atmospheric environments and is capable of withstanding a variety of corrosive conditions. Its installation is also suggested for data centres. Powder Coated tray is special item and manufactured to order.
Allied Tube & Conduit
Steel Wire Cable tray conforms to the following standards: BS EN 61537, IEC 61537.
288
Made with FlippingBook Digital Publishing Software