Materials & Finishes
Cable Ladder Materials & Finishes
Hot-Dip Galvanised [HG] Cable Trays, brackets, cantilever arms and fittings can be Hot-Dip Galvanised in accordance with BS EN ISO1461:2009 and chromated. The minimum average Zinc Coating is as follows: • Cold Rolled From 1.5mm Steel – 55 microns • 2.5mm Steel – 55 microns • Fittings spun galvanised – 45 microns • Mild Steel - BS EN 10149-3 grade S280 - min.yeild 280 n/mm 2 - UTS 370 n/mm 2 Deep Hot-Dip Galvanised • BS EN 10025 S275JO+AR+CL1 or equivalent/better. 2mm min. thick material. Stainless Steel [SS] • Stainless Steel 1.4404 (316L) • Hot Rolled to B.S.EN10088-2-1.4404+1D. • Cleaned (Pickled & Passivated) Applying a pickling process to Stainless Steel results in a clean product and it also removes any heat discolouration that has occurred in the welding process. SPECIAL COATINGS AND MATERIAL GRADES ARE AVAILABLE ON REQUEST
Pickle & Passivate is available upon request
Certification and Quality Standards
BS EN 61537:2007
ISO 9001 - Quality system certification ISO 14001 - Environment certification ISO 45001 - Health and safety certification
Useful Cross Section Type U10
Type U12
Type U15
* * * * * * * *
* * * * * * * *
* * * * * * * *
Width Useful cross section mm (cm 2 ) 100 75 150 113 200 150 300 225 400 300 450 338 500 375 600 450 750 563 800 600 900 650 1000 750
Width Useful cross section mm (cm 2 ) 100 100 150 150 200 200 300 300 400 400 450 450 500 500 600 600 750 750 800 800 900 900 1000 1000
Width Useful cross section mm (cm 2 ) 100 125 150 188 200 250 300 375 400 500 450 563 500 625 600 750 750 938 800 1000 900 1125 1000 1250
Allied Tube & Conduit
99
Made with FlippingBook Digital Publishing Software