TREX SIGNATURE® X-SERIES™ HORIZONTAL FRAMELESS GLASS RAIL Installation Instructions
Preparing X-Series Anchor Posts for Glass Installation
3
4
2
2. Temporarily remove front inside corner cover and front side cover from both X-Series Anchor Posts.
3. At both post locations, slide bottom glass spacer into X-Series Anchor Post as shown so that it sits on top of the post baseplate. 4. At both post locations, insert glass edge pad vertically into X-Series Anchor Post as shown, rotate so that flat side is facing up, and install on top of bottom glass spacer as shown.
2
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
XGLASS-0725
Made with FlippingBook - Share PDF online