19 D
35140
35470
41840D
3739
6516
4030
232
Number
Description
Price
ATD BODY & FENDER TOOLS / CUT OUT KNIVES / DENT PULLERS / HEAT GUNS
ATD-3736 ATD-3739 ATD-4030
$71.79 $130.19 $87.19
Dual Temperature Heat Gun Kit - Includes : Dual temperature heat gun; Reduction nozzle; Reflector nozzle; Large deflector nozzle; Small deflector nozzle; Molded plastic storage case Dual Temperature High Output Heat Gun - Temperature Range: 158˚F to 1,112˚F; CFM: 14 Low, 17 High; Voltage: 120V; Wattage: 1,500; Cord: 6 ft. length, 14AWG; cETLus approved 7-Pc. Heavy-Duty Body & Fender Tool Set - Includes : Pick Hammer; Body Hammer; Bumping Hammer; Universal Dolly; Spoon Dolly; Heel Dolly; Combination Dolly; Molded Storage/Carrying Case
ATD-5160 Muscle Max 10 lbs. Heavy-Duty Dent Puller Set - Includes: 10 lbs. slide hammer; (2) Pipes; 2-hole pipe; Hex nut; Chain and hook; (5) Plates; Molded storage case; 7/8” x 14 thread pitch for accessories $149.99 ATD-7541 Heavy-Duty Dent Puller - Heavy-duty dent puller/slide hammer with vinyl cushion finger grip handle; Puller comes with extra screw and hook for pulling bearings and seals; Shaft 1/2” x 20 thread; 1.75 lbs. slide hammer $41.29 ATD-8562 18” Professional Urethane Cut Out Knife - Extra reach to cut hardened urethane down to the dash line; Heavy-duty steel and aluminum construction; Ergonomic cushion grip handle; Use with standard utility razor blade $25.09 ATD-8563 24” Urethane Cut Out Knife - Made of rigid aluminum that will not flex; Flush securing screws prevent dash and molding damage; Long range provides cutting leverage and distance needed in today’s long dash windshields; Vinyl non-slip grip; Use with utility knife blade $17.59
PLIERS & PLIER SETS
MTI-54
$59.99 $46.89 $72.59
Adjustable Indexing Trim Clip Pliers - Removes plastic anchors with center pins without damage to the pin or the anchor with one-handed operation 2-Pc. 30° & 80° Push Pin Plier Set - 30° and 80° offset push pin pliers; Specially designed for removal of push pins With center locking pin 3-Pc. Body Clip Plier Set - 30° and 80° offset push pin pliers; Panel clip pliers with V design for removal of standard clips without center pins
KDT-41840 KDT-41850
TRIM TOOLS / PINSTRIPE, UPHOLSTERY & WINDSHIELD REMOVERS
AST-232
$231.39
ONYX Pinstripe Removal Kit with Onyx 4,000rpm Pinstripe Removal Tool with Safety Lever and 12 Smart Eraser® Pads - 203 – 4,000 Max. RPM. Made in the USA
AST-400E Smart Eraser - Molded rubber with 5/16”” – 24 thread arbor for use with the 533ET or 1208A; Pad size: 4”; For use with Astro model # 533ET or 1208A; USE WITH MAXIMUM RATED 4000RPM TOOL; NOT FOR USE WITH STANDARD NON-GEARED DIE GRINDERS; Made in the USA $15.18 AST-400E6 6 pack Smart Eraser - Molded rubber with 5/16”” – 24 thread arbor for use with the 533ET or 1208A; Pad size: 4”; For use with Astro model # 533ET or 1208A; USE WITH MAXIMUM RATED 4000RPM TOOL; NOT FOR USE WITH STANDARD NON-GEARED DIE GRINDERS; Made in the USA $83.79 AST-WINDKO ONYX Air Windshield Remover with 3pc. Blade Set – Rear Exhaust - 20,000 oscillations per minute; Sealant cutter that cuts around bonded and encapsulated glass; Efficiently cleans and smoothes moldings after glass removal; Rear exhaust directs air away from work. Includes: 57mm Bent Blade; 52mm Bent Curved Blade; 35mm Flat-Nose Straight Blade $123.49 ATD-6516 Deluxe Windshield Removing Tool - Durable aluminum handle and steel cable pull tool; Cuts caulking compound around windshield fast and easy $29.99 ATD-6517 6-Pc. Replacement Blades for ATD-6516 - Strong, tempered steel blades can be resharpened or replaced $19.59 ATD-8584 11-Pc. Trim Removal Tool Set - Includes: Wide-type Remover ( ATD-85841 ); Pull-type Remover ( ATD-85842 ); Handy Remover ( ATD-85843 ); Narrow-type Remover ( ATD-85844 ); Upholstery Clip Remover ( ATD-85845 ); Angled Clip Panel Remover ( ATD-85846 ); Fork Tip Flat Clip Panel Remover ( ATD-85847 ); Clip Panel Remover ( ATD-85848 ); Sharp Tip Flat Clip Panel Remover ( ATD-85849 ); Panel Remover ( ATD- 85850 ); Blunt Tip Flat Clip Panel Remover ( ATD-85851 ) $63.89 ATD-85827 27-Pc. Trim Panel Removal & Scraper Tool Set - Includes: Wide Scraper Tool; General Scraper Tool; Flat Scraper Tool; General Purpose Wide Edge Tool; Thin & Flat Tool; General Purpose Wedge Tool; General Purpose Pry Tool; Thin with Pry Tip Tool; Pry Tool; Concentrated Scraper Tool; Curved Scraper Tool; Tube Scraper Tool; Angle Scraper Tool; Emblem Remove; Rounded Corner Scraper Tool; Box Corner Scraper Tool; Sharp Corner Scraper Tool; Angled Push/Pull Scraper; Flat Push/Pull Scraper; Panel Clip Removal Tool; Large Grommet Pry Tool; Small Grommet Pry Tool; Flat Grommet Remover; Flat Grommet Pry Tool; Flat Sealant Application Spade; Interior Button Removal Tool; Wire Insertion Tool $78.59 LIS-35140 Pocket Plastic Clip Remover - Quickly removes plastic fasteners used on weather stripping, radiator shrouds, fender linings, air dams and other plastic or rubber parts $11.19 LIS-35400 Door Upholstery Remover - For Plastic Fasteners; Rugged tool with a large comfortable handle $10.89 LIS-35460 Double-Ended Clip Lifter - Smaller opening works for lifting the center pin and the wider opening lifts the fastener from the panel. Also works on most plastic fasteners, plastic clips, upholstery or door panels. Zinc finish with 3-1/2” grip. Overall tool length is 8” $13.39 LIS-35470 Double-Ended Trim Remover - Double-ended tool with radius on one end and narrow square tip on the other end. Strong heat-treated alloy steel tool is ideal for prying car interior panels $16.19
SLIDE HAMMERS
SLIDE HAMMER PULLER SET Includes: • 5 lbs. heavy-duty slide hammer • 8-function internaL or external 3-jaw puller - Range: 1-1/4” to 3-1/8” • Internal or external 2-jaw puller - Range: 1-1/4” to 3-1/8” • Puller hook, rear axle puller • Dent puller • Special grip wrench adapter; 5/8” - 18 threaded end • Molded storage case included
LIGHT-DUTY SLIDE HAMMER AND PULLER SET
• Slide hammer and accessories can be used in many applications • Capable of inside spreads from 3/8” to 1-1/4” and outer spreads up to 3” • Puller reaches depths up to 2-1/2” • All components are in a blow-molded case for easy storage and organization
STUBBY AIR SLIDE HAMMER • Bpm: 1200 • Recommended running pressure : 90psi • Average airconsumption : 3.0 CFM • Spindle : 5/8” x 18 • Extension rod : 5/8” x 18
HD AIR SLIDE HAMMER • Bpm: 1200 • Recommended running pressure : 90psi • Average airconsumption : 3.0 CFM • Spindle : 5/8” x 18 • Extension rod : 5/8” x 18
AST-658.................................... $248.79 AST-658HD................................ $326.95
ATD-3045.................................. $160.09 MTI-49700.................................. $89.99
Made with FlippingBook flipbook maker