40 D
UNIVERSAL DISC BRAKE CALIPER TOOL • (5) adapters for 2-
BRAKE PISTON WIND BACK TOOL, 2 & 3 PIN • Adapter will work on right or left hand rewind calipers • 2 Pin range is from 1/2” to 1-1/2” • 3 Pin range is from 1” to 1-11/16. Use with a 3/8” square drive
2-PC. TRUCK ANCHOR PIN BUSHING DRIVER Includes an 11-1/2” long driver that allows bushings to be driven straight without removing the hub assembly. Double-sided cone snaps onto driver to drive out and install bushings.
BENDIX/KNORR-BREMSE AIR DISC BRAKE PAD RETAINER TOOL • The only tool for servicing Bendix/Knorr-Bremse air disc brakes
and 4-wheel disc brake assemblies of most cars • May be used on or off the car • Helps prevent damage to the piston and boot
LIS-25000................................. $111.39
LIS-25200................................... $48.29
LIS-29090...................................$81.19
LOC-891......................................$55.59
2-PC. AUTOMATIC SLACK ADJUSTER TOOL SET • Specifically designed for installation and servicing of Meritor air brake systems • 5/16” double-square head reversible wrench with built-in ratcheting mechanism
11-PT. TRUCK BRAKE CALIPER SOCKET
BRAKE SPRING FORK • The tip design cradles the return spring to keep it from sliding off. Heat treated material and extra-long shaft provides strength and stability. Ergonomic handle for comfort.
BRAKE SPRING BAR • Lever action against the axle eliminates need for wrenches, pry bars and screwdrivers. • Tool is 18” long with a molded handle for comfort.
• 11-point socket for air disc brake caliper adjustment • Works on Bendix ADB 2X, ADB 225, SN6, SN7, SK7 air disc brake
LIS-29120................................... $10.89
LIS-39770................................... $35.09
LIS-40030...................................$36.89
ATD-5166....................................$51.29
DISC BRAKE PISTON TOOL • Designed to rotate the parking brake activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with (4) wheel disc brakes • Will function on most import, Ford, Chrysler and some GM models
BRAKE CALIPER PRESSES 277 : Works on small and medium single piston brake calipers found in subcompact to midsize cars with single piston calipers. Size Range: .95” to 2.25” 279 : Works on twin & quad piston fixed calipers,and single & twin piston floating calipers. Size Range: 1.5” to 3”
SLACK ADJUSTERS
4651 (both tools)
277
7578
KAS-4651 Rockwell/Arvin Meritor Slack Adjuster Release Tool & Wrench . ........................................$68.29 KAS-7578 7/16” Haldex Slack Adjuster Wrench . ....... $36.79 KAS-8569 9/16” Bendix Slack Adjuster Wrench . .......$45.39
KAS-277. ......................................................... $66.89 KAS-279. ......................................................... $76.39
ATD-5060......................................................... $11.49
SPEEDY BRAKE PAD SPREADER
DUAL PISTON BRAKE CALIPER COMPRESSOR
• Compresses brake pistons in seconds • Squeeze the handle and the fast acting plunger compresses disc brake pistons in seconds • Makes brake pad replacement an easy job
• Compresses dual brake pistons simultaneously • Squeeze the tool handle until the plunger contacts the inboard brake pad • Continue squeezing to compress both pistons • Makes dual piston pad replacement a simple job
MEDIUM-DUTY BRAKE CALIPER COMPRESSOR 11-1/2” Long breaker bar for leverage. Also works on some dual piston brake calipers. Can be used while caliper is on the vehicle or hanging free. Range is 2” to 4”.
LIS-24300........................................................ $53.49
LIS-25750........................................................ $66.29
LIS-29700....................................................... $298.19
17-PC. BRAKE CALIPER SOCKET SET
AIR BRAKE SERVICE TOOL KIT • Removal tools for slack adjusters and push-rod clevis pins used on brake systems of class 7 and 8 vehicles • Includes 2 slack adjuster pullers and a brake clevis pin press
BEARING RACE AND SEAL DRIVER SETS 61900 : Includes (6) drivers, handle extension for driving bearing races and seals on hubs with deep brake drums
12800
Set Contains: • 1/4” Drive Bit • (6) 3/8” Drive Bits • 1/2” Drive Bit • (9) 1/2” Drive Sockets
2-IN-1 S-CAM BRAKE TOOL Features a steel shaft with a U-shaped fork for spring tensioning and an S-shaped end for positioning brake shoes to aid roller installation
12800 : (11) drivers to fit cars and trucks up to 1 ton. (2) handles for hammering and for use with an air hammer
LIS-12800 Master Pneumatic ....... $175.29 LIS-61900 Heavy-Duty . .............. $306.79
ATD-5117.................................... $49.59
ATD-5163.................................... $37.29
ATD-5164.................................. $271.69
PIN PRESSES Spring-loaded plunger automatically centers the press on the slack clevis pin, for easy removal
18-PC. DISC BRAKE CALIPER TOOL SET • For use on most domestic and import 2WD and 4WD vehicles • Includes tools and adapters for both right- and left-handed threads • Use on main brakes and parking brake systems
10-PC. BEARING RACE AND SEAL DRIVER KIT • Range: 1-1/2” to 3”
FRONT WHEEL DRIVE BEARING ADAPTER KIT Includes: • (13) Bushings • (4) Sleeves • (2) Sleeve Plates • Sliding Screw, Spacer, Nut and Washers
41840
41850
• Includes driver handle and (9) adapter sizes • Easier to install bearing races and seals without damage to race, axle housing or brake rotors
LIS-41840 Slack Adjuster Rod Pin Press . ........... $86.59 LIS-41850 Brake Clevis Pin Press . . $112.49
ATD-5165.................................. $109.69
ATD-8622.................................. $101.39
ATD-8625.................................. $151.29
Made with FlippingBook flipbook maker