CYLINDER HEADS
Chrysler Small Block 318-360 (Cont.) Edelbrock E-CNC Victor 16° Aluminum Head The E-CNC Victor Small Block Mopar head is completely redesigned for bracket rac- ers and serious enthusiasts. 100% CNC-machined to improved air flow of 325CFM @
.600" lift with an in-line valve design of 16 degrees and a .750" raised, 225cc intake ports while the flange was extended to accommodate a stock or a Super Victor race intake manifold. The new design features large 77cc raised exhaust ports with a W5 bolt pattern exhaust flange. Intake end-seal spacers are provided. Part No. Description Intake Runner Comb. Chamber Valve Angle Intake Valve Exhaust Valve EDE61709 Bare Head 225cc 58cc 16° 2.150" 1.600" Note: These heads are designed to use Big Block Wedge rocker arm assemblies. Sold Individually.
Chrysler Big Block 383-440 Edelbrock Performer RPM Aluminum Head
Engineered to replace 1961-78 361-440 wedge cylinder head. Angle plug type is fitted with bronze valve guides and ductile valve seats. Sold individually bare, or assembled with stain- less valves and springs to accommodate up to .600" valve lift. Sold individually. Part No. Description Intake Runner
EDE60929
Comb. Chamber Valve Angle Intake Valve Exhaust Valve
EDE60189 EDE60917 EDE60919 EDE60925 EDE60929
Assembled
210cc 210cc 210cc 210cc 210cc
88cc
15° 15° 15° 15° 15°
2.140" 2.250" 2.140" 2.140" 2.140"
1.810" 2.000" 1.810" 1.810" 1.810"
Bare Bare
82-84cc
84cc 84cc 84cc
Assembled, 1.550" Dual Spring
Assembled
EDE5059
Edelbrock E-Street 440 Chrysler The Edelbrock E-Street 440 Chrysler aluminum cylinder replace 1961-78, 361-440 wedge cylinder head. Features include; improved combustion 75cc or 84cc chambers allow head to be used with stock pistons, 210cc intake runners, 70cc exhaust ports, 2.140" intake valves, 1.81" exhaust valves, manganese-bronze valve guides, 5/8" thick deck and stock exhaust port flange bolt pattern. Sold in pairs. Part No. Description Intake Runner
Comb. Chamber Valve Angle Intake Valve Exhaust Valve
EDE5090 EDE5093
Assembled, 1.550" Dual Spring Assembled, 1.550" Dual Spring
210cc 210cc
75cc 84cc
15° 15°
2.140" 2.140"
1.810" 1.810"
Edelbrock Victor Aluminum Head Victor Big Block Chrysler heads feature .650" raised intake ports and .250" raised exhaust ports for improved flow, and dual quench 75cc combustion chambers. Existing Victor intake may be used on high or low deck blocks. Sold individually. Part No. Description Intake Runner Comb. Chamber
EDE77919
Valve Angle Intake Valve Exhaust Valve
EDE77919 EDE77929
Bare, Victor
280cc 280cc
75cc 75cc
15° 15°
2.200" 2.200"
1.810" 1.810"
Assembled, Victor
Edelbrock Victor Max Wedge Aluminum Head
Heads are machined to match Max Wedge intake manifolds for B/RB big-blocks. Intake ports are raised .650" and exhaust ports are raised .250". Intake flange is extended .950" to eliminate the need for intake spacers and the exhaust flange is extended .300" from stock. Part No. Description Intake Runner Comb. Chamber
Valve Angle Intake Valve Exhaust Valve
EDE77939 EDE77949
Bare, Max Wedge Head
290cc 290cc
75cc 75cc
15° 15°
2.200" 2.200"
1.810" 1.810"
Assembled, Max Wedge Head
2018 ENGINE BUILDER CATALOG
174
Made with FlippingBook flipbook maker