CRANKSHAFTS
Chrysler-Mopar Small Block 318-360 A-Engine (Cont.) Cast Steel Crankshafts - Cont. Scat
Pro Comp Features: 9000 cast steel, precision ground, knife-edged counter- weights, factory balanced, straight shot oil holes, micro-polished, IMCA and Racersaver approved.
Min. Rod Length
Rod Pin
Rear Main Seal Balance
Target Bobweight Grams
Approx. Weight Lbs.
Part No.
Description
Stroke
Main
Pro Comp, 340 Standard Weight Pro Comp, 360 Standard Weight
SCA9-340-4000-6123
4.000"
6.123" 2.125" 2.500"
2-Pc.
Int.
2050
54
SCA9-360-4000-6123
4.000"
6.123" 2.125" 2.810"
2-Pc.
Int.
2050
56
Forged Steel Crankshafts Eagle
“ESP” Features: SAE 4340 steel non-twist forging, multi-stage heat-treated, stress-relieved, .125" radii for use with narrowed bearings, chamfered oil holes, cross-drilled oiling, shot-peened, nitride hardened, X-rayed, magnafluxed, and sonic tested. Recommended for use up to 1500 HP.
Min. Rod Length
Rod Pin
Rear Main Seal Balance
Target Bobweight Grams
Approx. Weight Lbs.
Part No.
Description
Stroke 3.310" 3.580" 4.000" 4.000"
Main
EAG434033106123 340 Standard Weight EAG436035806123 360 Standard Weight EAG434040006123 340 Standard Weight EAG436040006123 360 Standard Weight
6.123" 2.125" 2.500" 6.123" 2.125" 2.810" 6.123" 2.125" 2.500" 6.123" 2.125" 2.810"
2-Pc. 2-Pc. 2-Pc. 2-Pc.
Int. Int. Int. Int.
2050 2050 2050 2050
54 56 54 56
Scat Pro Series Features: 4340 forged steel, heat-treated, nitride hardened, large fillet radii on all journals, lightening holes rod journals, straight shot & chamfered oil holes, precision ground and micro-polished.
Min. Rod Length
Rod Pin
Rear Main Seal Balance
Target Bobweight Grams
Approx. Weight Lbs.
Part No.
Description
Stroke
Main
Pro Series, 340 Standard Weight Pro Series, 360 Standard Weight
SCA4-340-4000-6123
4.000"
6.123" 2.125" 2.500"
2-Pc.
Int.
2050
58
SCA4-360-4000-6123
4.000"
6.123" 2.125" 2.810"
2-Pc.
Int.
2050
60
Chrysler-Mopar Big Block 361-383-400 B-Engine Forged Steel Crankshafts Eagle
“ESP” Features: SAE 4340 steel non-twist forging, multi-stage heat-treated, stress- relieved, .125" radii for use with narrowed bearings, chamfered oil holes, cross- drilled oiling, shot-peened, nitride hardened, X-rayed, magnafluxed, and sonic tested. Recommended for use up to 1500 HP.
Min. Rod Length
Rod Pin
Rear Main Seal Balance
Target Bobweight Grams
Approx. Weight Lbs.
Part No.
Description 6-Bolt Flange 8-Bolt Flange
Stroke 4.150" 4.150"
Main
EAG440041506760 EAG440241506760
6.760" 2.375" 2.625" 6.760" 2.375" 2.625"
2-Pc. 2-Pc.
Int. Int.
2550 2550
70 70
2018 ENGINE BUILDER CATALOG
19
Made with FlippingBook flipbook maker